[
  {
    "id": "flooring-box-coverage",
    "value": 20,
    "unit": "ft2/box",
    "source": "manufacturer label typical",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "flooring-waste",
    "value": 10,
    "unit": "%",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paint-coverage-per-gallon",
    "value": 350,
    "unit": "ft2/gal",
    "source": "manufacturer label typical",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paint-waste",
    "value": 10,
    "unit": "%",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paint-coats",
    "value": 2,
    "unit": "coats",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "drywall-waste",
    "value": 10,
    "unit": "%",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "drywall-sheet-4x8",
    "value": 32,
    "unit": "ft2/sheet",
    "source": "Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 8 ft = 32 ft2.",
    "url": "https://www.gypsum.org/wp-content/uploads/2015/07/223-04.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "drywall-sheet-4x12",
    "value": 48,
    "unit": "ft2/sheet",
    "source": "Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 12 ft = 48 ft2.",
    "url": "https://www.gypsum.org/wp-content/uploads/2015/07/223-04.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "drywall-panels-per-bundle",
    "value": 2,
    "unit": "panels/bundle",
    "source": "USG Sheetrock submittal sheets (regular and UltraLight 1/2 in panels): two panels per bundle, taped face to face.",
    "url": "https://www.usg.com/content/usgcom/en/products/walls/drywall/drywall-panels/lightweight-panels/sheetrock-ultralight-panels.html",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "drywall-mud-gal-per-1000",
    "value": 9.4,
    "unit": "gal per 1000 ft2",
    "source": "USG ready-mixed joint compound (Sheetrock Plus 3 and all-purpose): approximately 9.4 gallons per 1,000 sq ft of gypsum panels for taping, two coats and finishing; USG says about two 4.5 gallon pails finish 1,000 sq ft. Texture is extra.",
    "url": "https://www.usg.com/content/usgcom/en/products-solutions/products/finishes/joint-compounds/sheetrockbrandultralightweightallpurposejointcompound.html",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "drywall-mud-pail",
    "value": 4.5,
    "unit": "gal/pail",
    "source": "USG ready-mixed joint compound is sold in 4.5 gallon pails (3.5 gallon cartons also exist).",
    "url": "https://www.usg.com/content/usgcom/en/products-solutions/products/finishes/joint-compounds/sheetrockbrandultralightweightallpurposejointcompound.html",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "gravel-mulch-waste",
    "value": 10,
    "unit": "%",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "gravel-mulch-bag-yield",
    "value": 0.5,
    "unit": "ft3/bag",
    "source": "manufacturer label typical",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "mulch-bag-yield",
    "value": 2,
    "unit": "ft3/bag",
    "source": "Scotts Nature Scapes Color Enhanced Mulch is sold in 2 cu ft bags; the listing gives 12 sq ft of coverage at 2 in deep. 1.5 and 3 cu ft bags also exist, so check the bag.",
    "url": "https://www.lowes.com/pd/Scotts-Nature-Scapes-Color-Enhanced-2-cu-ft-Classic-Black-Mulch/50257551",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "fence-post-spacing",
    "value": 8,
    "unit": "ft",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "fence-rails-per-section",
    "value": 2,
    "unit": "rails/section",
    "source": "contractor rule of thumb, editable",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "concrete-bag-yield-80lb",
    "value": 0.6,
    "unit": "ft3",
    "source": "QUIKRETE data sheets list about 0.60 cubic feet per 80 lb bag (for example the Crack Resistant Concrete Mix 1006-80). Yield varies a little by product and by how wet the mix is.",
    "url": "https://www.quikrete.com/pdfs/data_sheet-crack%20resistant%20concrete%20mix%201006-80.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "concrete-bag-yield-60lb",
    "value": 0.45,
    "unit": "ft3",
    "source": "QUIKRETE 5000 High Early Strength data sheet: a 60 lb bag yields about 0.45 cubic feet. Yield varies a little by product.",
    "url": "https://www.quikrete.com/pdfs/data_sheet-quikrete%205000%201007.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "concrete-bag-yield-40lb",
    "value": 0.3,
    "unit": "ft3",
    "source": "QUIKRETE Concrete Mix 1101 data sheet: a 40 lb bag yields approximately 0.30 cubic feet (8.5 L). Yield varies a little with water content.",
    "url": "https://www.quikrete.com/PDFs/DATA_SHEET-Concrete%20Mix%201101.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "concrete-slab-waste",
    "value": 0.1,
    "unit": "fraction",
    "source": "Common contractor rule of thumb (about 5-10% for spillage and uneven ground). Editable by the user. Not an official figure.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "readymix-order-increment",
    "value": 0.25,
    "unit": "yd3",
    "source": "Assumed ordering step for ready-mix; real minimums vary by supplier. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "bulk-order-increment",
    "value": 0.5,
    "unit": "yd3",
    "source": "Assumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paint-door-area",
    "value": 20,
    "unit": "ft2",
    "source": "Typical interior door opening, about 3 ft x 6.8 ft. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paint-window-area",
    "value": 15,
    "unit": "ft2",
    "source": "Typical window opening, about 3 ft x 5 ft. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "concrete-readymix-threshold",
    "value": 1,
    "unit": "yd3",
    "source": "Above about 1 cubic yard, ready-mix delivery is usually more practical than bags. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "fence-post-concrete-bags",
    "value": 2,
    "unit": "bag/post",
    "source": "Rule of thumb for 80 lb concrete bags set per fence post hole; depends on hole size. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "gravel-density",
    "value": 1.4,
    "unit": "ton/yd3",
    "source": "Typical loose crushed gravel weight, about 1.4 tons per cubic yard; varies by stone and moisture. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "roofing-bundles-per-square",
    "value": 3,
    "unit": "bundle/square",
    "source": "GAF: most standard 3-tab and architectural shingles come 3 bundles per roofing square (100 ft2). Heavier premium shingles can need 4. Check the wrapper of your shingles.",
    "url": "https://www.gaf.com/en-us/blog/your-home/how-many-bundles-of-shingles-are-in-a-square---63a47862-f7e1-4e73-abcf-8d09917a8b8d",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "roofing-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for simple roofs. Complex roofs need more. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "tile-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for straight layouts. Diagonal and pattern layouts need more. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "deck-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for deck boards. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "deck-joist-spacing",
    "value": 16,
    "unit": "in",
    "source": "Common joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "insulation-waste",
    "value": 5,
    "unit": "percent",
    "source": "Contractor rule of thumb for batt insulation. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "insulation-package-coverage",
    "value": 40,
    "unit": "ft2/package",
    "source": "Typical batt package coverage; varies by product. Check the label. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "blown-coverage-r30",
    "value": 68.5,
    "unit": "ft2/bag",
    "source": "Owens Corning AttiCat blown-in fiberglass fact sheet: R-30 at 14.6 bags per 1,000 sq ft, 68.5 sq ft per bag, 10.75 in minimum thickness. Other products and bag weights differ; the bag label is the authority.",
    "url": "https://dcpd6wotaa0mb.cloudfront.net/mdms/dms/Residential%20Insulation/10011287/10011287-AttiCat-Manufacturers-Fact-Sheet.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "blown-coverage-r38",
    "value": 52.6,
    "unit": "ft2/bag",
    "source": "Owens Corning AttiCat chart as quoted by third-party calculators: R-38 at about 52.6 sq ft per bag (19 bags per 1,000 sq ft). Not verified against the maker sheet; check the bag label.",
    "url": "https://dcpd6wotaa0mb.cloudfront.net/mdms/dms/Residential%20Insulation/10011287/10011287-AttiCat-Manufacturers-Fact-Sheet.pdf",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "blown-coverage-r49",
    "value": 39.9,
    "unit": "ft2/bag",
    "source": "Owens Corning AttiCat chart as quoted by third-party calculators: R-49 at about 39.9 sq ft per bag (25 bags per 1,000 sq ft). Not verified against the maker sheet; check the bag label.",
    "url": "https://dcpd6wotaa0mb.cloudfront.net/mdms/dms/Residential%20Insulation/10011287/10011287-AttiCat-Manufacturers-Fact-Sheet.pdf",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "foam-kit-board-feet",
    "value": 600,
    "unit": "board ft/kit",
    "source": "Two-part spray foam kits are rated in board feet (1 sq ft at 1 in thick); a 600 kit such as Froth-Pak 600 covers about 600 sq ft at 1 in. Yield drops in cold conditions. Not verified against the maker sheet.",
    "url": "https://www.frothpak.dupont.com/products/630-foam-system.html",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "stairs-max-riser",
    "value": 7.75,
    "unit": "in",
    "source": "2021 International Residential Code R311.7.5.1: maximum riser height 7 3/4 in. Some states differ (for example North Carolina and Virginia allow 8 1/4 in). Check your local code.",
    "url": "https://codes.iccsafe.org/content/IRC2021P3/chapter-3-building-planning",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "stairs-min-tread",
    "value": 10,
    "unit": "in",
    "source": "2021 International Residential Code R311.7.5.2: minimum tread depth 10 in. Some states differ (for example North Carolina allows 9 in). Check your local code.",
    "url": "https://codes.iccsafe.org/content/IRC2021P3/chapter-3-building-planning",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "cmu-face-in2",
    "value": 128,
    "unit": "in2",
    "source": "A nominal 8 x 8 x 16 in concrete block has actual dimensions 3/8 in smaller so that an 8 in module holds with 3/8 in mortar joints (NCMA TEK 2-1A, as summarized by block makers). The nominal face with joint is 16 x 8 = 128 in2.",
    "url": "https://angelusblock.com/resources/cmu-basics/dimensions-and-sizes/",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-13"
  },
  {
    "id": "brick-face-in2",
    "value": 21.333333333333332,
    "unit": "in2",
    "source": "Editable default. Sources disagree on bricks per ft2: 6.75 comes from modular coursing (3 courses = 8 in, face 8 x 2 2/3 = 21.33 in2) and Glen-Gery lists 6.86 with a 3/8 in joint. Brick and joint sizes vary, so check your brick.",
    "url": "https://www.glengery.com/brick-sizes",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "sod-roll-coverage",
    "value": 10,
    "unit": "ft2/roll",
    "source": "Common sod roll size (2 ft x 5 ft). Check what your supplier sells. Not verified.",
    "url": "https://shop.estabrooksonline.com/item/447774801905/Sod-Roll-2-x-5-10-sq-ft",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "seed-bag-coverage",
    "value": 1000,
    "unit": "ft2/bag",
    "source": "Typical grass seed bag coverage; varies by product. Check the label. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "sod-waste",
    "value": 5,
    "unit": "percent",
    "source": "Contractor rule of thumb for cuts. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "sod-pallet-coverage",
    "value": 450,
    "unit": "ft2/pallet",
    "source": "Typical sod pallet: most suppliers sell pallets of 400 to 500 sq ft (450 is common); large-roll pallets can reach 700. Ask your supplier how many square feet are on each pallet. Not verified.",
    "url": "https://www.angi.com/articles/how-much-sod-pallet-cover.htm",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "trim-door-width",
    "value": 3,
    "unit": "ft",
    "source": "Typical interior door opening width. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "trim-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for miter cuts. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "wallpaper-roll-width",
    "value": 20.5,
    "unit": "in",
    "source": "Common US wallpaper roll width. Check your roll label. Not verified.",
    "url": "https://www.lowes.com/pd/-/1000603071",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "wallpaper-roll-length",
    "value": 33,
    "unit": "ft",
    "source": "Common US single roll length. Check your roll label. Not verified.",
    "url": "https://www.lowes.com/pd/-/1000603071",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "wallpaper-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for trimming and mistakes. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "siding-package-coverage",
    "value": 100,
    "unit": "ft2/package",
    "source": "Siding is commonly sold by the square (100 ft2). Check your product. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "siding-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for cuts. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "siding-panels-per-carton",
    "value": 24,
    "unit": "panels/carton",
    "source": "CertainTeed siding catalog: Double 4 in clapboard, 12 ft 6 in panels, 24 panels per carton (2 squares). Dutch lap and other profiles differ (22 or 12 per carton), and insulated siding is not 2 squares per carton.",
    "url": "https://res.cloudinary.com/hdi/image/upload/v1686320242/Mid-Am_Building_Supply/Vendor%20Documents/CertainTeed/Siding_Product_Catalog.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "siding-squares-per-carton",
    "value": 2,
    "unit": "squares/carton",
    "source": "CertainTeed siding catalog: Double 4 in clapboard comes 2 squares (200 sq ft) per carton. Check your profile: insulated lines differ.",
    "url": "https://res.cloudinary.com/hdi/image/upload/v1686320242/Mid-Am_Building_Supply/Vendor%20Documents/CertainTeed/Siding_Product_Catalog.pdf",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "block-waste",
    "value": 5,
    "unit": "percent",
    "source": "Contractor rule of thumb for breakage and cuts. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "cmu-per-pallet",
    "value": 90,
    "unit": "blocks/pallet",
    "source": "Typical pallet of 8 x 8 x 16 in concrete block: 90 is common, 72 at some retailers and plants. Ask your supplier. Not verified.",
    "url": "https://engineerfix.com/how-many-8-inch-concrete-blocks-are-on-a-pallet/",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "retaining-wall-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "column-waste",
    "value": 10,
    "unit": "percent",
    "source": "Contractor rule of thumb for spillage and uneven holes. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "gravel-bulk-threshold",
    "value": 1,
    "unit": "yd3",
    "source": "Above about 1 cubic yard, bulk delivery is usually cheaper and quicker than bags. Rule of thumb, not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paver-base-depth",
    "value": 4,
    "unit": "in",
    "source": "Western Interlock paving stone installation guide: 4 to 6 in of compacted base for light vehicular and pedestrian traffic (6 to 12 in for heavy traffic). 4 in is the low end for patios and walkways; cold climates and soft soil need more.",
    "url": "https://westerninterlock.com/installation-guide/paving-stone-installation/",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "paver-bedding-sand-depth",
    "value": 1,
    "unit": "in",
    "source": "Western Interlock paving stone installation guide: a uniform depth of 1 in of coarse concrete sand is recommended for the bedding layer.",
    "url": "https://westerninterlock.com/installation-guide/paving-stone-installation/",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "paver-waste",
    "value": 10,
    "unit": "percent",
    "source": "Rule of thumb, editable: extra pavers for cuts at edges and breakage. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "paver-pallet-pieces",
    "value": 540,
    "unit": "pavers/pallet",
    "source": "Belgard Holland 60 mm (4 x 8 in) paver: 540 pieces per pallet, 120 sq ft. Other thicknesses and plants differ (30 mm: 672 pieces).",
    "url": "https://www.homedepot.com/p/BELGARD-8-in-L-x-4-in-W-x-2-25-in-H-60-mm-Toscana-Blend-Concrete-Holland-Pavers-Pallet-540-Piece-120-sq-ft-Pallet-10156510/313986082",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "paver-pallet-sqft",
    "value": 120,
    "unit": "ft2/pallet",
    "source": "Belgard Holland 60 mm (4 x 8 in) paver: one pallet of 540 pieces covers 120 sq ft.",
    "url": "https://www.homedepot.com/p/BELGARD-8-in-L-x-4-in-W-x-2-25-in-H-60-mm-Toscana-Blend-Concrete-Holland-Pavers-Pallet-540-Piece-120-sq-ft-Pallet-10156510/313986082",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "framing-studs-per-opening",
    "value": 2,
    "unit": "studs/opening",
    "source": "Rule of thumb, editable: about 2 extra studs per door or window for the king and jack studs beyond the regular layout. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "framing-corner-studs",
    "value": 2,
    "unit": "studs",
    "source": "Rule of thumb, editable: extra studs for a corner or wall intersection at the wall ends. Depends on the corner detail. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "framing-waste",
    "value": 10,
    "unit": "percent",
    "source": "Rule of thumb, editable: extra studs for crooked or split boards and blocking. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "rebar-lap-bar-diameters",
    "value": 40,
    "unit": "bar diameters",
    "source": "Rule of thumb, editable: 40 bar diameters. CRSI says the lap length varies with concrete strength, bar grade, bar size and spacing, and gives tables in its Reinforcement Anchorage and Splices. Follow your engineer or local code. Not verified.",
    "url": "https://www.crsi.org/reinforcing-basics/reinforcing-steel/splicing-bars/lap-splices/",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "rebar-edge-clearance",
    "value": 3,
    "unit": "in",
    "source": "Rule of thumb, editable: bars stop about 3 in from the slab edge. Follow your plans or local code for concrete cover. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "rebar-stock-length",
    "value": 20,
    "unit": "ft",
    "source": "Rule of thumb, editable: 20 ft is a common stock length at US suppliers; 10 ft bars are also sold. Check your store. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "rebar-chair-spacing",
    "value": 4,
    "unit": "ft",
    "source": "Rule of thumb, editable: one chair (bar support) about every 4 ft each way. Follow your plans. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "thinset-coverage-1-4x1-4",
    "value": 90,
    "unit": "ft2/bag",
    "source": "CUSTOM Building Products VersaBond Professional Tile Mortar coverage chart: 90 to 100 ft2 per 50 lb bag with a 1/4 x 1/4 x 1/4 in square-notch trowel. The low end is used. Other products differ: check your bag.",
    "url": "https://www.custombuildingproducts.com/?p=1389",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "thinset-coverage-1-4x3-8",
    "value": 60,
    "unit": "ft2/bag",
    "source": "CUSTOM Building Products VersaBond Professional Tile Mortar coverage chart: 60 to 67 ft2 per 50 lb bag with a 1/4 x 3/8 x 1/4 in square-notch trowel. The low end is used. Other products differ: check your bag.",
    "url": "https://www.custombuildingproducts.com/?p=1389",
    "verified": true,
    "kind": "fact",
    "checked": "2026-11-15"
  },
  {
    "id": "thinset-coverage-1-2x1-2",
    "value": 42,
    "unit": "ft2/bag",
    "source": "CUSTOM Building Products VersaBond Professional coverage chart shows 42 to 47 ft2 per 50 lb bag next to the 1/2 x 1/2 in square-notch row, but the row is marked with a note and CUSTOM does not recommend that trowel. The row layout was unclear, so this is not verified. Check your bag.",
    "url": "https://www.custombuildingproducts.com/?p=1389",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "grout-bag-yield-25lb",
    "value": 0.22,
    "unit": "ft3/bag",
    "source": "Worked out from the CUSTOM Polyblend Plus Sanded Grout coverage chart (25 lb bag): for example 12 x 12 x 3/8 in tile with a 1/8 in joint covers 348 ft2, which is about 390 in3 (0.226 ft3) of joint with the joint-volume formula. Rounded down. Derived, not printed on the chart: not verified.",
    "url": "https://www.custombuildingproducts.com/products/polyblendplus-sanded-grout-2",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "tile-setting-waste",
    "value": 10,
    "unit": "percent",
    "source": "Rule of thumb, editable: extra grout and thin-set for mixing loss and uneven surfaces. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  },
  {
    "id": "sheathing-waste",
    "value": 10,
    "unit": "percent",
    "source": "Rule of thumb, editable: extra sheets for cuts at edges, openings, hips and valleys. Not verified.",
    "url": "",
    "verified": false,
    "kind": "default"
  }
]
