Sheathing calculator
OSB or plywood sheets for a roof deck, walls or subfloor: area, openings, sheet size and waste.
Open the interactive calculatorSheathing needed by size
| Size | Main result | Shopping list |
|---|---|---|
| 8 × 8 ft | 3 sheets | 3 sheets Sheathing, 4 x 8 ft sheets |
| 10 × 10 ft | 4 sheets | 4 sheets Sheathing, 4 x 8 ft sheets |
| 10 × 12 ft | 5 sheets | 5 sheets Sheathing, 4 x 8 ft sheets |
| 12 × 12 ft | 5 sheets | 5 sheets Sheathing, 4 x 8 ft sheets |
| 12 × 16 ft | 7 sheets | 7 sheets Sheathing, 4 x 8 ft sheets |
| 16 × 20 ft | 11 sheets | 11 sheets Sheathing, 4 x 8 ft sheets |
| 20 × 20 ft | 14 sheets | 14 sheets Sheathing, 4 x 8 ft sheets |
| 24 × 24 ft | 20 sheets | 20 sheets Sheathing, 4 x 8 ft sheets |
Every other setting is at the calculator's default. Change them in the calculator for your own job.
Worked example
Using the default sizes, the result is 7 sheets (192 ft² to cover with 4 x 8 ft sheets).
| Item | Quantity | Note |
|---|---|---|
| Sheathing, 4 x 8 ft sheets | 7 sheet | 10% waste included |
How it is calculated
- Area:
length × width
24 × 8 = 192 ft² - Minus openings:
area − openings
192 − 0 = 192 ft² - Sheet area:
4 × sheet length
4 × 8 = 32 ft² - Sheets:
area × (1 + waste) ÷ sheet area, rounded up
192.0 × 1.10 ÷ 32 = 7 sheets
What to enter
| Field | Unit | Help |
|---|---|---|
| Length | ft | Length of the wall, floor or roof side. |
| Width or wall height | ft | Floor width, wall height, or roof slope length from eave to ridge. |
| Openings to subtract | ft² | Windows and doors in a wall, or skylights. 0 for floors. |
| Sheet size | choose | 4 x 9 and 4 x 10 ft sheets cover taller walls without a seam. |
| Extra for waste | % | Cuts at edges, openings, hips and valleys. |
Before you buy
- For a roof, use the slope length, not the flat width of the building. Add both sides.
Frequently asked questions
How do I calculate sheathing?
OSB or plywood sheets for a roof deck, walls or subfloor: area, openings, sheet size and waste. Enter your sizes in the calculator. It works out area (length × width) and the later steps, then rounds up to what stores sell.
How much waste should I add?
The calculator starts at 10%. Source: Rule of thumb, editable: extra sheets for cuts at edges, openings, hips and valleys. Not verified. You can change it. More cuts, patterns or uneven ground need more.
Where does the sheathing waste number come from?
10 percent. Rule of thumb, editable: extra sheets for cuts at edges, openings, hips and valleys. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Does this calculator show prices?
No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.