Rebar calculator

Rebar grid for a concrete slab: bars each way, total length, stock bars with laps, and chairs.

Open the interactive calculator

Rebar needed by size

SizeMain resultShopping list
8 × 8 ft6 bars6 bars Rebar #4 (20 ft bars); 90 ft Rebar #4: total length with laps; 9 chairs Rebar chairs (bar supports)
10 × 10 ft8 bars8 bars Rebar #4 (20 ft bars); 152 ft Rebar #4: total length with laps; 16 chairs Rebar chairs (bar supports)
10 × 12 ft13 bars13 bars Rebar #4 (20 ft bars); 178 ft Rebar #4: total length with laps; 16 chairs Rebar chairs (bar supports)
12 × 12 ft18 bars18 bars Rebar #4 (20 ft bars); 207 ft Rebar #4: total length with laps; 16 chairs Rebar chairs (bar supports)
12 × 16 ft21 bars21 bars Rebar #4 (20 ft bars); 278 ft Rebar #4: total length with laps; 20 chairs Rebar chairs (bar supports)
16 × 20 ft26 bars26 bars Rebar #4 (20 ft bars); 451 ft Rebar #4: total length with laps; 30 chairs Rebar chairs (bar supports)
20 × 20 ft28 bars28 bars Rebar #4 (20 ft bars); 546 ft Rebar #4: total length with laps; 36 chairs Rebar chairs (bar supports)
24 × 24 ft46 bars46 bars Rebar #4 (20 ft bars); 856 ft Rebar #4: total length with laps; 49 chairs Rebar chairs (bar supports)

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 28 bars (#4 bars of 20 ft: 546 ft in total).

ItemQuantityNote
Rebar #4 (20 ft bars)28 bar14 + 14 runs at 18 in
Rebar #4: total length with laps546 ftFor ordering by length or cut lists
Rebar chairs (bar supports)36 chairAbout every 4 ft each way

How it is calculated

  1. Bars along the length: (width − 2 × edge) × 12 ÷ spacing, rounded up, + 1
    19.50 × 12 ÷ 18 + 1 (each 19.50 ft) = 14 bars
  2. Bars along the width: (length − 2 × edge) × 12 ÷ spacing, rounded up, + 1
    19.50 × 12 ÷ 18 + 1 (each 19.50 ft) = 14 bars
  3. Lap length: lap in bar diameters × bar diameter
    40 × 0.5 in = 20 in
  4. Total bar length: bars × (run + laps)
    14 × 19.50 + 14 × 19.50 = 546 ft
  5. Stock bars: whole bars per run + leftover pieces cut from shared bars
    14 + 14 bars of 20 ft = 28 bars
  6. Chairs: (run ÷ chair spacing + 1) each way, multiplied
    (5 + 1) × (5 + 1) = 36 chairs

What to enter

FieldUnitHelp
Slab lengthftLength of the slab.
Slab widthftWidth of the slab.
Bar spacinginCenter to center, both ways. Use the spacing on your plans.
Edge clearanceinHow far the bars stop from the slab edge.
Bar sizechooseThe bar number is the diameter in eighths of an inch.
Stock bar lengthftLength of the bars you buy. 20 ft is common.
Lap lengthbar diametersOverlap where two bars join, in bar diameters. 40 is a rule of thumb. Follow your engineer or local code.
Chair spacingftOne bar support every this many feet each way. Use 0 to leave chairs out.

Before you buy

Frequently asked questions

How do I calculate rebar?

Rebar grid for a concrete slab: bars each way, total length, stock bars with laps, and chairs. Enter your sizes in the calculator. It works out bars along the length ((width − 2 × edge) × 12 ÷ spacing, rounded up, + 1) and the later steps, then rounds up to what stores sell.

Where does the rebar lap bar diameters number come from?

40 bar diameters. Rule of thumb, editable: 40 bar diameters. CRSI says the lap length varies with concrete strength, bar grade, bar size and spacing, and gives tables in its Reinforcement Anchorage and Splices. Follow your engineer or local code. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the rebar edge clearance number come from?

3 in. Rule of thumb, editable: bars stop about 3 in from the slab edge. Follow your plans or local code for concrete cover. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the rebar stock length number come from?

20 ft. Rule of thumb, editable: 20 ft is a common stock length at US suppliers; 10 ft bars are also sold. Check your store. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the rebar chair spacing number come from?

4 ft. Rule of thumb, editable: one chair (bar support) about every 4 ft each way. Follow your plans. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Related calculators