Block or brick wall calculator
Concrete blocks or bricks for a wall: count them from the length, height and openings.
Open the interactive calculatorBlock or brick wall needed by size
| Length | Main result | Shopping list |
|---|---|---|
| 10 ft | 48 blocks | 48 blocks Concrete blocks, 16 x 8 in face |
| 25 ft | 119 blocks | 119 blocks Concrete blocks, 16 x 8 in face |
| 50 ft | 237 blocks | 237 blocks Concrete blocks, 16 x 8 in face |
| 100 ft | 473 blocks | 473 blocks Concrete blocks, 16 x 8 in face |
| 150 ft | 709 blocks | 709 blocks Concrete blocks, 16 x 8 in face |
| 200 ft | 945 blocks | 945 blocks Concrete blocks, 16 x 8 in face |
Every other setting is at the calculator's default. Change them in the calculator for your own job.
Worked example
Using the default sizes, the result is 95 blocks (80 ft² of wall).
| Item | Quantity | Note |
|---|---|---|
| Concrete blocks, 16 x 8 in face | 95 block | 1.125 per ft², includes 5% waste |
How it is calculated
- Wall area:
length × height − openings
20 × 4 − 0 = 80 ft² - Blocks per ft²:
144 ÷ face area in in²
144 ÷ 128 = 1.13 block/ft² - Blocks with waste:
area × per ft² × (1 + waste), rounded up
80.0 × 1.125 × 1.05 = 95 blocks
What to enter
| Field | Unit | Help |
|---|---|---|
| What are you building with? | choose | Face sizes include the mortar joint (nominal sizes). |
| Wall length | ft | Total length of the wall. |
| Wall height | ft | Height of the wall. |
| Openings (doors, windows) | ft² | Total area of openings to subtract. 0 if none. |
| Extra for waste | % | Breakage and cut pieces. |
Before you buy
- Mortar, rebar, grout and footing are NOT included. Retaining and load-bearing walls are structural: check local code and ask a licensed professional.
Frequently asked questions
How do I calculate block or brick wall?
Concrete blocks or bricks for a wall: count them from the length, height and openings. Enter your sizes in the calculator. It works out wall area (length × height − openings) and the later steps, then rounds up to what stores sell.
How much waste should I add?
The calculator starts at 5%. Source: Contractor rule of thumb for breakage and cuts. Not verified. You can change it. More cuts, patterns or uneven ground need more.
Where does the cmu face in2 number come from?
128 in2. A nominal 8 x 8 x 16 in concrete block has actual dimensions 3/8 in smaller so that an 8 in module holds with 3/8 in mortar joints (NCMA TEK 2-1A, as summarized by block makers). The nominal face with joint is 16 x 8 = 128 in2. Checked against its source on 2026-11-13.
Where does the brick face in2 number come from?
21.333333333333332 in2. Editable default. Sources disagree on bricks per ft2: 6.75 comes from modular coursing (3 courses = 8 in, face 8 x 2 2/3 = 21.33 in2) and Glen-Gery lists 6.86 with a 3/8 in joint. Brick and joint sizes vary, so check your brick. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Where does the block waste number come from?
5 percent. Contractor rule of thumb for breakage and cuts. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Does this calculator show prices?
No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.
Can I build from this estimate?
No. It is a planning estimate. Structural parts depend on local code, soil and loads. Check local code and ask a licensed professional.