Wallpaper calculator

Rolls of wallpaper for a room: strips from the roll width, with the pattern repeat.

Open the interactive calculator

Wallpaper needed by size

SizeMain resultShopping list
8 × 8 ft6 rolls6 rolls Wallpaper rolls (20.5 in x 33 ft)
10 × 10 ft7 rolls7 rolls Wallpaper rolls (20.5 in x 33 ft)
10 × 12 ft8 rolls8 rolls Wallpaper rolls (20.5 in x 33 ft)
12 × 12 ft9 rolls9 rolls Wallpaper rolls (20.5 in x 33 ft)
12 × 16 ft10 rolls10 rolls Wallpaper rolls (20.5 in x 33 ft)
16 × 20 ft13 rolls13 rolls Wallpaper rolls (20.5 in x 33 ft)
20 × 20 ft14 rolls14 rolls Wallpaper rolls (20.5 in x 33 ft)
24 × 24 ft17 rolls17 rolls Wallpaper rolls (20.5 in x 33 ft)

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 8 rolls (28 strips, 4 per roll).

ItemQuantityNote
Wallpaper rolls (20.5 in x 33 ft)8 roll28 strips plus 10% waste

How it is calculated

  1. Strips around the room: 2 × ceil(length ÷ roll width) + 2 × ceil(width ÷ roll width), because a strip stops at each corner
    2 × ceil(144 ÷ 20.5) + 2 × ceil(120 ÷ 20.5) = 28 strips
  2. Strip height: wall height × 12 + pattern repeat
    8 × 12 + 0 = 96 in
  3. Strips per roll: floor(roll length × 12 ÷ strip height)
    floor(33 × 12 ÷ 96) = 4 strips
  4. Rolls: strips with waste ÷ strips per roll, rounded up
    30.8 ÷ 4 = 7.7 rolls

What to enter

FieldUnitHelp
Room lengthftLength of the room.
Room widthftWidth of the room. All four walls are covered.
Wall heightftFloor to ceiling.
Roll widthinFrom the roll label. 20.5 in is common in the US.
Roll lengthftFrom the roll label.
Pattern repeatinVertical pattern repeat. 0 for plain or random patterns.
Extra for waste%Trimming and mistakes.

Frequently asked questions

How do I calculate wallpaper?

Rolls of wallpaper for a room: strips from the roll width, with the pattern repeat. Enter your sizes in the calculator. It works out strips around the room (2 × ceil(length ÷ roll width) + 2 × ceil(width ÷ roll width), because a strip stops at each corner) and the later steps, then rounds up to what stores sell.

How much waste should I add?

The calculator starts at 10%. Source: Contractor rule of thumb for trimming and mistakes. Not verified. You can change it. More cuts, patterns or uneven ground need more.

Where does the wallpaper roll width number come from?

20.5 in. Common US wallpaper roll width. Check your roll label. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the wallpaper roll length number come from?

33 ft. Common US single roll length. Check your roll label. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the wallpaper waste number come from?

10 percent. Contractor rule of thumb for trimming and mistakes. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Related calculators