Drywall calculator

Walls and ceiling: how many 4 × 8 or 4 × 12 sheets to buy, with waste and the math shown.

Open the interactive calculator

Quick answers for common sizes

SizeYou need
Bedroom 12×1017 sheets
519.2 ft² with waste, 32 ft² per sheet
Basement 24×2041 sheets
1302.4 ft² with waste, 32 ft² per sheet
Garage 20×2039 sheets
1232.0 ft² with waste, 32 ft² per sheet

Computed with the calculator's default settings. Change the numbers for your own job.

Drywall needed by size

SizeMain resultShopping list
8 × 8 ft11 sheets11 sheets Drywall sheets, 4 × 8 ft; 1 pail Joint compound, ready-mixed
10 × 10 ft15 sheets15 sheets Drywall sheets, 4 × 8 ft; 1 pail Joint compound, ready-mixed
10 × 12 ft17 sheets17 sheets Drywall sheets, 4 × 8 ft; 1 pail Joint compound, ready-mixed
12 × 12 ft19 sheets19 sheets Drywall sheets, 4 × 8 ft; 2 pails Joint compound, ready-mixed
12 × 16 ft22 sheets22 sheets Drywall sheets, 4 × 8 ft; 2 pails Joint compound, ready-mixed
16 × 20 ft31 sheets31 sheets Drywall sheets, 4 × 8 ft; 2 pails Joint compound, ready-mixed
20 × 20 ft36 sheets36 sheets Drywall sheets, 4 × 8 ft; 3 pails Joint compound, ready-mixed
24 × 24 ft47 sheets47 sheets Drywall sheets, 4 × 8 ft; 3 pails Joint compound, ready-mixed

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 17 sheets (519.2 ft² with waste, 32 ft² per sheet).

ItemQuantityNote
Drywall sheets, 4 × 8 ft17 sheet32 ft² per sheet, 10% waste included
Joint compound, ready-mixed1 pail4.5 gal pails, about 9.4 gal per 1000 ft² for tape, coats and finish (texture is extra)

How it is calculated

  1. Wall area: 2 × (length + width) × ceiling height
    2 × (12 + 10) × 8 = 352 ft²
  2. Ceiling area: length × width
    12 × 10 = 120 ft²
  3. Wall + ceiling area: wall area + ceiling area
    352.00 + 120.00 = 472 ft²
  4. With waste: total area × (1 + waste)
    472.00 × 1.10 (10% waste, once) = 519.2 ft²
  5. Sheet area: selected sheet size
    4 × 8 ft = 32 ft² = 32 ft²/sheet
  6. Sheets: area with waste ÷ sheet area, rounded up
    519.20 ÷ 32 = 16.225, rounded up to 17 = 16.23 sheets
  7. Joint compound: board area × gallons per 1,000 ft² ÷ 1,000
    472.00 × 9.4 ÷ 1000 = 4.44 gal, 1 × 4.5 gal pails = 4.44 gal

What to enter

FieldUnitHelp
Room lengthftType 12, 12.5 ft, 12' 6", or 3.8 m.
Room widthftThe shorter side is fine too.
Ceiling heightftMeasure floor to ceiling. 8 ft is common.
What are you covering?choosePick what you are hanging drywall on.
Doors and windows (optional)ft²Total area of openings to take off the walls. Many installers skip small openings, so 0 is a safe starting point.
Sheet sizechoose4 × 8 is easy to handle; 4 × 12 means fewer seams.
Extra for waste%Covers cuts and breakage. You can change it.

Frequently asked questions

How do I calculate drywall?

Walls and ceiling: how many 4 × 8 or 4 × 12 sheets to buy, with waste and the math shown. Enter your sizes in the calculator. It works out wall area (2 × (length + width) × ceiling height) and the later steps, then rounds up to what stores sell.

How much do I need for Bedroom 12×10?

With the calculator's default settings, Bedroom 12×10 needs about 17 sheets. Drywall sheets, 4 × 8 ft: 17 sheets; Joint compound, ready-mixed: 1 pail.

How much do I need for Basement 24×20?

With the calculator's default settings, Basement 24×20 needs about 41 sheets. Drywall sheets, 4 × 8 ft: 41 sheets; Joint compound, ready-mixed: 3 pails.

How much do I need for Garage 20×20?

With the calculator's default settings, Garage 20×20 needs about 39 sheets. Drywall sheets, 4 × 8 ft: 39 sheets; Joint compound, ready-mixed: 3 pails.

How much waste should I add?

The calculator starts at 10%. Source: contractor rule of thumb, editable You can change it. More cuts, patterns or uneven ground need more.

Where does the drywall waste number come from?

10 %. contractor rule of thumb, editable This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the drywall sheet 4x8 number come from?

32 ft2/sheet. Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 8 ft = 32 ft2. Checked against its source on 2026-11-13.

Where does the drywall sheet 4x12 number come from?

48 ft2/sheet. Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 12 ft = 48 ft2. Checked against its source on 2026-11-13.

Where does the drywall mud gal per 1000 number come from?

9.4 gal per 1000 ft2. USG ready-mixed joint compound (Sheetrock Plus 3 and all-purpose): approximately 9.4 gallons per 1,000 sq ft of gypsum panels for taping, two coats and finishing; USG says about two 4.5 gallon pails finish 1,000 sq ft. Texture is extra. Checked against its source on 2026-11-15.

Where does the drywall mud pail number come from?

4.5 gal/pail. USG ready-mixed joint compound is sold in 4.5 gallon pails (3.5 gallon cartons also exist). Checked against its source on 2026-11-15.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Guides for this calculator

Common sizes

Related calculators