Baseboard and trim calculator

How many pieces of baseboard, crown or other trim for a room, after doors.

Open the interactive calculator

Baseboard and trim needed by size

SizeMain resultShopping list
8 × 8 ft4 pieces4 pieces Trim, 8 ft pieces
10 × 10 ft6 pieces6 pieces Trim, 8 ft pieces
10 × 12 ft6 pieces6 pieces Trim, 8 ft pieces
12 × 12 ft7 pieces7 pieces Trim, 8 ft pieces
12 × 16 ft8 pieces8 pieces Trim, 8 ft pieces
16 × 20 ft10 pieces10 pieces Trim, 8 ft pieces
20 × 20 ft11 pieces11 pieces Trim, 8 ft pieces
24 × 24 ft13 pieces13 pieces Trim, 8 ft pieces

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 6 pieces (41.0 ft of trim around the room).

ItemQuantityNote
Trim, 8 ft pieces6 piece41.0 ft needed, includes 10% waste

How it is calculated

  1. Room perimeter: 2 × (length + width)
    2 × (12 + 10) = 44 ft
  2. Minus door openings: perimeter − doors × door width
    44.0 − 1 × 3 = 41 ft
  3. Pieces: trim length with waste ÷ piece length, rounded up
    45.1 ÷ 8 = 5.64 pieces

What to enter

FieldUnitHelp
Room lengthftLength of the room.
Room widthftWidth of the room.
Door openingsdoorsEach door opening has no baseboard across it.
Piece length you buychooseStock length at the store.
Extra for waste%Miter cuts and corners use extra length.

Frequently asked questions

How do I calculate baseboard and trim?

How many pieces of baseboard, crown or other trim for a room, after doors. Enter your sizes in the calculator. It works out room perimeter (2 × (length + width)) and the later steps, then rounds up to what stores sell.

How much waste should I add?

The calculator starts at 10%. Source: Contractor rule of thumb for miter cuts. Not verified. You can change it. More cuts, patterns or uneven ground need more.

Where does the trim door width number come from?

3 ft. Typical interior door opening width. Rule of thumb, not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the trim waste number come from?

10 percent. Contractor rule of thumb for miter cuts. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Related calculators