Grout & thin-set calculator

Tile setting materials: bags of grout from the joint size and bags of thin-set for your trowel.

Open the interactive calculator

Grout & thin-set needed by size

SizeMain resultShopping list
8 × 8 ft2 bags2 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 1 bag Grout bags
10 × 10 ft2 bags2 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 1 bag Grout bags
10 × 12 ft3 bags3 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 1 bag Grout bags
12 × 12 ft3 bags3 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 1 bag Grout bags
12 × 16 ft4 bags4 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 1 bag Grout bags
16 × 20 ft6 bags6 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 2 bags Grout bags
20 × 20 ft8 bags8 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 2 bags Grout bags
24 × 24 ft11 bags11 bags Thin-set mortar, 50 lb bags (1/4x3/8 in notch); 2 bags Grout bags

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 2 bags (thin-set, plus 1 bags of grout for 80 ft²).

ItemQuantityNote
Thin-set mortar, 50 lb bags (1/4x3/8 in notch)2 bag60 ft² per bag, 10% waste included
Grout bags1 bag0.052 ft³ of joints, 0.22 ft³ per bag

How it is calculated

  1. Area: length × width
    10 × 8 = 80 ft²
  2. Grout volume: area × 144 × joint × thickness × (tile length + tile width) ÷ (tile length × tile width) ÷ 1728
    80.00 × 144 × 0.125 × 0.375 × 24 ÷ 144 ÷ 1728 = 0.05 ft³
  3. Grout bags: grout volume × (1 + waste) ÷ grout per bag, rounded up
    0.052 × 1.10 ÷ 0.22 = 1 bags
  4. Thin-set bags: area × (1 + waste) ÷ coverage per bag, rounded up
    80.00 × 1.10 ÷ 60 = 2 bags

What to enter

FieldUnitHelp
Area lengthftLength of the floor or wall area to tile.
Area widthftWidth (or height of the wall).
Tile widthinWidth of one tile in inches.
Tile lengthinLength of one tile in inches.
Tile thicknessinJoint depth. 3/8 in is 0.375.
Grout jointinSpace between tiles. 1/8 in is 0.125.
Trowel notchchooseBigger tiles need a bigger notch. Check the tile and mortar labels.
Grout per bagft³/bagVolume of grout one bag makes. About 0.22 ft³ for a 25 lb bag of sanded grout.
Extra for waste%Mixing loss, cleanup and uneven surfaces.

Frequently asked questions

How do I calculate grout & thin-set?

Tile setting materials: bags of grout from the joint size and bags of thin-set for your trowel. Enter your sizes in the calculator. It works out area (length × width) and the later steps, then rounds up to what stores sell.

How much waste should I add?

The calculator starts at 10%. Source: Rule of thumb, editable: extra grout and thin-set for mixing loss and uneven surfaces. Not verified. You can change it. More cuts, patterns or uneven ground need more.

Where does the thinset coverage 1 4x1 4 number come from?

90 ft2/bag. CUSTOM Building Products VersaBond Professional Tile Mortar coverage chart: 90 to 100 ft2 per 50 lb bag with a 1/4 x 1/4 x 1/4 in square-notch trowel. The low end is used. Other products differ: check your bag. Checked against its source on 2026-11-15.

Where does the thinset coverage 1 4x3 8 number come from?

60 ft2/bag. CUSTOM Building Products VersaBond Professional Tile Mortar coverage chart: 60 to 67 ft2 per 50 lb bag with a 1/4 x 3/8 x 1/4 in square-notch trowel. The low end is used. Other products differ: check your bag. Checked against its source on 2026-11-15.

Where does the thinset coverage 1 2x1 2 number come from?

42 ft2/bag. CUSTOM Building Products VersaBond Professional coverage chart shows 42 to 47 ft2 per 50 lb bag next to the 1/2 x 1/2 in square-notch row, but the row is marked with a note and CUSTOM does not recommend that trowel. The row layout was unclear, so this is not verified. Check your bag. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the grout bag yield 25lb number come from?

0.22 ft3/bag. Worked out from the CUSTOM Polyblend Plus Sanded Grout coverage chart (25 lb bag): for example 12 x 12 x 3/8 in tile with a 1/8 in joint covers 348 ft2, which is about 390 in3 (0.226 ft3) of joint with the joint-volume formula. Rounded down. Derived, not printed on the chart: not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the tile setting waste number come from?

10 percent. Rule of thumb, editable: extra grout and thin-set for mixing loss and uneven surfaces. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Related calculators