EnoughToBuy Guides

Concrete & masonry

How Many Bags of Concrete Do You Need for a 12x14 Slab?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 12x14 ft slab that is 4 inches thick holds 56 cubic feet of concrete (2.07 cubic yards). That is 94 bags of 80 lb mix with no waste, or 103 bags with a 10 percent allowance. With 60 lb bags buy 137. With 40 lb bags buy 206. If you order a truck instead, ask for 2.5 cubic yards of ready-mix.

Try itConcrete slab: enter your own sizes
You would buy103bags
  • Concrete mix, 80 lb bags103 bags
  • Gravel, bulk (4 in base, if used)2.07 yd³
Open the full calculator with more options

Concrete for a 12x14 slab

The slab covers 168 square feet. Concrete is sold by volume, so the surface area is multiplied by the thickness: 168 square feet at 4 inches is 56 cubic feet. At 2.07 cubic yards this is a ready-mix job for most people. 103 bags would weigh about 8,240 pounds, roughly 4.1 tons, and every bag has to be mixed before the first batch starts to set. A truck delivers about 2.5 cubic yards in one go. Ask your supplier about minimum loads and short-load fees.

12 ft 14 ft Cross-section 4 in concrete 4 in gravel base (if used) soil
A 12x14 ft slab, 4 inches thick: 168 square feet of surface.

Bags of concrete for a 12x14 slab by thickness

Thickness changes the volume in direct proportion. These figures are for 12x14 ft with 10 percent waste and 80 lb bags, with the ready-mix order in the last column.

ThicknessVolume (ft³)80 lb bagsReady-mix
3 in42771.75 yd³
4 in561032.5 yd³
5 in701293 yd³
6 in841543.5 yd³

Four inches is a common thickness for patios, walkways and shed floors. At 6 inches the same 12x14 slab needs 154 bags. Slabs that carry vehicles or heavy loads are usually thicker and often reinforced, so confirm the thickness with your local building department before you order.

The math for a 12x14 slab

  1. Area. 12 ft × 14 ft = 168 square feet.
  2. Volume. 168 × 4 ÷ 12 = 56 cubic feet.
  3. Cubic yards. 56 ÷ 27 = 2.074 cubic yards.
  4. Waste. 56 × 1.10 = 61.6 cubic feet.
  5. Bags. An 80 lb bag yields about 0.6 cubic feet, so 61.6 ÷ 0.6 = 102.67, which rounds up to 103 bags.

The 10 percent allowance is a common rule of thumb for uneven ground, flexing forms and mix left in the tools. Without it you would need 94 bags, so the allowance adds 9.

What else a 12x14 slab needs

  • Gravel base. A 4 inch base under the slab is about 2.07 cubic yards of gravel.
  • Forms. The edge of the slab is 52 feet long. That is 7 boards of 8 feet, or 5 boards of 12 feet, before you cut corners and overlaps.
  • Reinforcement and joints. Wire mesh or rebar, and control joints, depend on local code and how the slab will be used.
  • Curing. Keep the slab damp or covered for several days so it gains strength.

For bag sizes, waste and the bags-or-truck decision in more detail, read how many bags of concrete for a 10x10 slab.

Nearby slab sizes

Sizes close to 12x14 ft, with the same 4 inch thickness and 10 percent waste:

Slab sizeArea80 lb bagsReady-mix
10x14 ft140 ft²862 yd³
12x12 ft144 ft²882 yd³
10x15 ft150 ft²922.25 yd³
12x16 ft192 ft²1182.75 yd³

Keep going

Frequently asked questions

How many bags of concrete for a 12x14 slab?

You need 94 bags of 80 lb mix with no waste and 103 with a 10 percent allowance, for a slab 4 inches thick. Buy 103.

How many 60 lb bags of concrete for a 12x14 slab?

You need 137 bags of 60 lb mix at 4 inches with 10 percent waste. A 60 lb bag yields about 0.45 cubic feet.

How many cubic yards of concrete is a 12x14 slab?

At 4 inches it is 2.07 cubic yards, or 2.28 with 10 percent waste. A supplier will usually round the order up to 2.5 cubic yards.

How many bags of concrete for a 12x14 slab 6 inches thick?

A 6 inch slab of this size needs 154 bags of 80 lb mix with 10 percent waste, or 140 with none.

Should I buy bags or ready-mix for a 12x14 slab?

At 2.07 cubic yards, a ready-mix truck is usually easier than mixing 103 bags by hand. Compare the delivery cost with the cost of the bags at your own store.

How Many Bags of Concrete Do You Need for a 12x14 Slab?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
concrete bag yield 80lb0.6 ft3Verified 2026-11-13QUIKRETE data sheets list about 0.60 cubic feet per 80 lb bag (for example the Crack Resistant Concrete Mix 1006-80). Yield varies a little by product and by how wet…
concrete bag yield 60lb0.45 ft3Verified 2026-11-13QUIKRETE 5000 High Early Strength data sheet: a 60 lb bag yields about 0.45 cubic feet. Yield varies a little by product.
concrete bag yield 40lb0.3 ft3Verified 2026-11-13QUIKRETE Concrete Mix 1101 data sheet: a 40 lb bag yields approximately 0.30 cubic feet (8.5 L). Yield varies a little with water content.
concrete slab waste0.1 fractionEditable defaultCommon contractor rule of thumb (about 5-10% for spillage and uneven ground). Editable by the user. Not an official figure.
readymix order increment0.25 yd3Editable defaultAssumed ordering step for ready-mix; real minimums vary by supplier. Rule of thumb, not verified.
concrete readymix threshold1 yd3Editable defaultAbove about 1 cubic yard, ready-mix delivery is usually more practical than bags. Rule of thumb, not verified.

Other sizes