EnoughToBuy Guides

Concrete & masonry

How Many Bags of Concrete Do You Need for a 10x10 Slab?

By the EnoughToBuy teamUpdated November 13, 20268 min readSources and assumptions

Quick answer: A 10x10 ft slab that is 4 inches thick needs 33.3 cubic feet of concrete (1.23 cubic yards). That is 56 bags of 80 lb mix with no waste, or 62 bags with the usual 10 percent extra. With 60 lb bags buy 82. With 40 lb bags buy 123.

If you only need a number to take to the store, you have it. The figures below come from the concrete slab calculator, so you can check each step.

Try itConcrete slab: enter your own sizes
You would buy62bags
  • Concrete mix, 80 lb bags62 bags
  • Gravel, bulk (4 in base, if used)1.23 yd³
Open the full calculator with more options

How many bags of concrete for a 10x10 slab, by bag size

The bag size you pick changes the count a lot, because each bag makes a different amount of concrete. These counts are for a slab 10 ft long, 10 ft wide and 4 in thick.

Bag sizeYield per bagBags, no wasteBags, 10% waste
80 lb0.6 ft³5662
60 lb0.45 ft³7582
40 lb0.3 ft³112123

The yields come from manufacturer data sheets. QUIKRETE lists about 0.60 cubic feet for an 80 lb bag, about 0.45 for a 60 lb bag, and about 0.30 for a 40 lb bag (see the 80 lb data sheet). Yield moves a little with the brand and with how wet you mix it, which is one of the reasons to add a margin.

The 80 lb bag is the most practical choice for a job this size because you handle fewer bags and make fewer mixing batches. The smaller bags only make sense if you cannot lift 80 lb, or if you are pouring in a spot where the load has to be carried by hand over a long distance.

10 ft 10 ft Cross-section 4 in concrete 4 in gravel base (if used) soil
A slab is a flat box: length times width times thickness gives the volume of concrete.

The math, step by step

Concrete is sold by volume, so the whole job is a volume calculation followed by a division. Here is the full chain for a 10x10 slab at 4 inches.

  1. Find the area. Length times width: 10 ft × 10 ft = 100 square feet.
  2. Turn thickness into feet. 4 inches ÷ 12 = 0.333 ft.
  3. Find the volume. Area times thickness: 100 × 0.333 = 33.33 cubic feet.
  4. Convert to cubic yards if you need to. Divide by 27, because a cubic yard is 3 ft × 3 ft × 3 ft = 27 cubic feet. 33.33 ÷ 27 = 1.235 cubic yards.
  5. Add a waste allowance. Multiply by 1.10 for 10 percent: 33.33 × 1.10 = 36.67 cubic feet.
  6. Divide by the bag yield and round up. 36.67 ÷ 0.6 = 61.11, which rounds up to 62 bags.

Always round up. Concrete cannot be added in a second batch the next day without a visible seam, so running short is far more expensive than ending with one extra bag.

Why add 10 percent for waste

The calculator starts with 10 percent. Real slabs use more concrete than the formula says for several ordinary reasons:

  • The ground under a hand-dug or hand-graded base is never perfectly flat, so the slab is a little thicker in some places than 4 inches.
  • Wood forms flex slightly when they are filled, which adds volume.
  • Some mix is always left on the wheelbarrow, the mixing tub and the tools.
  • Spills and a bag that is short on yield happen.

Ten percent is a common contractor rule of thumb for jobs like this, not a rule in a code book, and you can change it. A very flat, well-made base and a careful pour may need less. A rough site may need more. If you want a tighter number, compare the two columns in the table above: the difference between zero and ten percent is 6 bags of 80 lb mix, which is a small price for not running out in the middle of the pour. The guide on how much waste factor to add covers the usual percentage for other materials.

How thickness changes the number of bags

Thickness has a bigger effect than most people expect, because the volume rises in direct proportion. A slab that is 6 inches thick holds exactly 50 percent more concrete than a 4 inch slab of the same footprint.

ThicknessVolume (ft³)80 lb bags, no waste80 lb bags, 10% waste
3 in254246
4 in33.35662
5 in41.77077
6 in508492

Four inches is a common thickness for patios, walkways and shed floors. Slabs that carry vehicles or heavy loads are usually thicker and often reinforced, so confirm the thickness with your local building department or an engineer before you order. For a non-structural patio, local practice and the soil under it matter more than any single rule.

Bags or ready-mix: which is better for a 10x10 slab?

Mixing 62 bags by hand is real work. Each 80 lb bag weighs 80 pounds, so 62 bags weigh 4,960 pounds in total, about 2.48 tons, before you add water. You have to lift it into the truck, out of the truck, onto the mixing area and into the mixer.

The slab holds 1.23 cubic yards. Many suppliers deliver ready-mix by the truck, and the calculator uses roughly one cubic yard as the point where delivery becomes the more practical choice. Above that line you should ask for a quote. If you order ready-mix, the order is rounded up to the supplier's ordering step. With a quarter-yard step the 10x10 slab becomes an order of 1.5 cubic yards. Ask your supplier about minimum loads and short-load fees, because both vary by company and region.

Bags still win when the slab is small, when you cannot get a truck close to the site, or when you want to pour in small sections. A 10x10 slab sits right at the edge of where either choice can work. If you have a mixer and helpers, bags are fine. If you do not, ready-mix is much easier on your back and gives a more consistent mix.

Bags of concrete for other common slab sizes

Most searches for this topic are about a few popular sizes, so here they are side by side. Every row is a 4 inch slab with 10 percent waste, using 80 lb bags. The last column is the ready-mix order, rounded up to the supplier's ordering step.

Slab sizeAreaCubic yards (no waste)80 lb bagsReady-mix (cubic yards)
8 x 8 ft64 ft²0.79401
10 x 10 ft100 ft²1.23621.5
10 x 12 ft120 ft²1.48741.75
12 x 12 ft144 ft²1.78882
12 x 16 ft192 ft²2.371182.75
16 x 16 ft256 ft²3.161573.5
20 x 20 ft400 ft²4.942455.5

For a slab between two of these sizes, take the larger one, or enter your exact length and width in the calculator above. A 12 x 12 slab needs 88 bags, which is already more than most people want to mix by hand. A 20 x 20 slab is a ready-mix job: 5.5 cubic yards.

Do not forget the base, forms and reinforcement

The concrete is only part of the shopping list. A slab needs a stable base under it. A compacted gravel base about 4 inches deep is commonly recommended under patio slabs. For a 10x10 area that is about 1.23 cubic yards of gravel, according to the same calculator. There is a separate guide that works this out: how much gravel for a patio base.

Plan for these extras too:

  • Wood forms, usually 2×4 or 2×6 boards, and stakes to hold them.
  • Welded wire mesh or rebar to help control cracking, with spacing set by local code.
  • Control joints so the slab cracks where you want it to.
  • Curing materials. Keeping the slab damp for several days, or covering it with plastic or a curing compound, helps it gain strength.

Common mistakes when buying concrete for a slab

  1. Using nominal sizes. A "4 inch" slab should be 4 inches after your base is graded. Measure the depth of your forms in several places.
  2. Forgetting that bag weight is not the same as volume. Two brands of 80 lb bags can differ a little in yield. Check the bag label.
  3. Buying the exact number. With no margin, one short bag stops the pour. Round up.
  4. Mixing different brands in the same slab. Different mixes can set at different speeds and look different when finished. Buy the whole slab from one product.
  5. Ordering by the weight on a pallet. A pallet is a sales unit, not a measurement of your job. Always count bags from the volume.
  6. Ignoring the weather. Very hot, windy or freezing conditions change how quickly concrete sets. Choose a calm day when you can.

Frequently asked questions

How many 80 lb bags of concrete do I need for a 10x10 slab 4 inches thick?

You need 56 bags if the job is perfect and 62 bags with a 10 percent allowance. Buy 62. That is based on 0.60 cubic feet per 80 lb bag.

How many bags of concrete for a 10x10 slab 6 inches thick?

A 6 inch thick slab needs 92 bags of 80 lb mix with 10 percent waste, or 84 with no waste. The extra two inches add half again as much volume.

How many 60 lb bags of concrete for a 10x10 slab?

You need 82 bags of 60 lb mix with 10 percent waste. Without waste the count is 75. A 60 lb bag yields about 0.45 cubic feet.

How many 40 lb bags of concrete for a 10x10 slab?

You need 123 bags of 40 lb mix with 10 percent waste, or 112 without waste. Each 40 lb bag yields about 0.30 cubic feet.

How many cubic yards of concrete is a 10x10 slab?

A 10x10 slab at 4 inches is 1.23 cubic yards. With 10 percent waste it is 1.36 cubic yards. A ready-mix supplier will usually round that up to the next ordering step.

How much does a 10x10 concrete slab cost?

This guide does not give prices because they change by region, brand and supplier. To estimate your own cost, multiply the 62 bags by the shelf price at your store, or ask a ready-mix supplier to quote 1.5 cubic yards. Then add the base, forms and reinforcement.

How long does a concrete slab take to cure?

Concrete hardens over days and keeps gaining strength for weeks. Keep it damp and protected during the first several days. Concrete is generally specified at its design strength after about 28 days, so avoid heavy loads until then.

Can I pour a 10x10 slab in one day?

Most people can pour and finish a slab this size in one day if they have help, enough bags on site and a plan for mixing. Prepare the forms and base the day before, and do not start late in the afternoon.

How Many Bags of Concrete Do You Need for a 10x10 Slab?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
concrete bag yield 80lb0.6 ft3Verified 2026-11-13QUIKRETE data sheets list about 0.60 cubic feet per 80 lb bag (for example the Crack Resistant Concrete Mix 1006-80). Yield varies a little by product and by how wet…
concrete bag yield 60lb0.45 ft3Verified 2026-11-13QUIKRETE 5000 High Early Strength data sheet: a 60 lb bag yields about 0.45 cubic feet. Yield varies a little by product.
concrete bag yield 40lb0.3 ft3Verified 2026-11-13QUIKRETE Concrete Mix 1101 data sheet: a 40 lb bag yields approximately 0.30 cubic feet (8.5 L). Yield varies a little with water content.
concrete slab waste0.1 fractionEditable defaultCommon contractor rule of thumb (about 5-10% for spillage and uneven ground). Editable by the user. Not an official figure.
readymix order increment0.25 yd3Editable defaultAssumed ordering step for ready-mix; real minimums vary by supplier. Rule of thumb, not verified.
concrete readymix threshold1 yd3Editable defaultAbove about 1 cubic yard, ready-mix delivery is usually more practical than bags. Rule of thumb, not verified.
bulk order increment0.5 yd3Editable defaultAssumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified.

Keep reading