EnoughToBuy Guides

Outdoor

How Much Gravel Do You Need for a 10x15 Patio Base?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 10x15 ft area with a 4 inch gravel base needs about 1.85 cubic yards of gravel. With 10 percent extra for compaction that is 2.04 cubic yards, which a supplier will usually sell as 2.5 cubic yards in bulk, or you can buy 110 bags of 0.5 cubic feet. The gravel weighs roughly 2.9 tons.

Try itGravel & mulch: enter your own sizes
You would buy2.5yd³
  • Gravel, bulk2.5 yd³
Open the full calculator with more options

Gravel for a 10x15 patio base

The area is 150 square feet. At 4 inches deep, the volume is 50 cubic feet. At 2.04 cubic yards with waste, bulk delivery is usually easier than 110 bags. Suppliers sell bulk gravel in steps, here 2.5 cubic yards.

10 ft 15 ft 4 in deep
A gravel base for a 10x15 ft area, 4 inches deep: area times depth gives the volume.

Gravel for a 10x15 base by depth

DepthCubic yards (no waste)Bulk orderBags
2 in0.931.5 yd³55
3 in1.392 yd³83
4 in1.852.5 yd³110
6 in2.783.5 yd³165

Most patio bases are about 4 inches thick when compacted, but pavers, walkways and driveways differ. Your paver or slab manufacturer gives a recommended base depth, and soft or wet soil often needs a deeper one.

The math for a 10x15 base

  1. Area. 10 × 15 = 150 square feet.
  2. Volume. 150 × 4 ÷ 12 = 50 cubic feet.
  3. Cubic yards. 50 ÷ 27 = 1.852.
  4. Waste. × 1.10 = 55 cubic feet, or 2.04 cubic yards.
  5. Order. Bulk is rounded to 0.5 yard steps: 2.5 cubic yards. In bags of 0.5 cubic feet: 55 ÷ 0.5 = 110, rounded up to 110 bags.

Weight of the gravel for a 10x15 base

A cubic yard of crushed gravel weighs about 1.4 tons, so 2.04 cubic yards is about 2.9 tons. A typical pickup carries about a ton or less, so this is more than one load. Ask your supplier for the actual weight if you pay by the ton.

The same area in other materials

MaterialDepthCubic yards (no waste)Bulk order
Gravel4 in1.852.5 yd³
Sand1 in0.461 yd³
Mulch3 in1.392 yd³
Topsoil4 in1.852.5 yd³

Preparing the base for a 10x15 area

  • Dig and level. Remove grass and soft soil so the finished surface ends up at the height you want.
  • Fabric. Landscape fabric under the gravel keeps it from mixing into the soil. For a 10x15 area that is 150 square feet, so buy about 165 square feet to allow for overlaps.
  • Edges. The edge of the area is 50 feet long, which is how much edging or restraint you may need if the base is not held by a wall or a slab.
  • Lifts. Spread the gravel in layers and compact each one. A 4 inch base is two lifts of about 2 inches, with a plate compactor or a hand tamper.
  • Check levels with a straightedge before the surface goes on.

Nearby sizes

AreaCubic yardsBulk orderBags
10x10 ft100 ft²1.231.5 yd³74
10x12 ft120 ft²1.482 yd³88
12x12 ft144 ft²1.782 yd³106
12x16 ft192 ft²2.373 yd³141

Keep going

Frequently asked questions

How many cubic yards of gravel for a 10x15 area?

1.85 cubic yards at 4 inches deep, or 2.04 with 10 percent for compaction. A bulk order is usually 2.5 cubic yards.

How many bags of gravel for a 10x15 area?

110 bags of 0.5 cubic feet for a 4 inch base. At 2 inches you need 55.

How many tons of gravel for a 10x15 patio base?

About 2.9 tons, using 1.4 tons per cubic yard. The real weight depends on the stone and moisture.

How deep should the gravel base be?

About 4 inches of compacted gravel is common under patios and walkways. Follow your paver or slab maker's instructions and local practice.

How Much Gravel Do You Need for a 10x15 Patio Base?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
gravel mulch waste10 %Editable defaultcontractor rule of thumb, editable
gravel mulch bag yield0.5 ft3/bagEditable defaultmanufacturer label typical
bulk order increment0.5 yd3Editable defaultAssumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified.
gravel density1.4 ton/yd3Editable defaultTypical loose crushed gravel weight, about 1.4 tons per cubic yard; varies by stone and moisture. Not verified.
gravel bulk threshold1 yd3Editable defaultAbove about 1 cubic yard, bulk delivery is usually cheaper and quicker than bags. Rule of thumb, not verified.

Other sizes