Outdoor
How Much Gravel Do You Need for a 20x30 Patio Base?
Quick answer: A 20x30 ft area with a 4 inch gravel base needs about 7.41 cubic yards of gravel. With 10 percent extra for compaction that is 8.15 cubic yards, which a supplier will usually sell as 8.5 cubic yards in bulk, or you can buy 440 bags of 0.5 cubic feet. The gravel weighs roughly 11.4 tons.
- Gravel, bulk8.5 yd³
Gravel for a 20x30 patio base
The area is 600 square feet. At 4 inches deep, the volume is 200 cubic feet. At 8.15 cubic yards with waste this is a delivery job. Plan where the truck can dump the pile, and how you will move about 11.4 tons of stone to the base.
Gravel for a 20x30 base by depth
| Depth | Cubic yards (no waste) | Bulk order | Bags |
|---|---|---|---|
| 2 in | 3.7 | 4.5 yd³ | 220 |
| 3 in | 5.56 | 6.5 yd³ | 330 |
| 4 in | 7.41 | 8.5 yd³ | 440 |
| 6 in | 11.11 | 12.5 yd³ | 660 |
Most patio bases are about 4 inches thick when compacted, but pavers, walkways and driveways differ. Your paver or slab manufacturer gives a recommended base depth, and soft or wet soil often needs a deeper one.
The math for a 20x30 base
- Area. 20 × 30 = 600 square feet.
- Volume. 600 × 4 ÷ 12 = 200 cubic feet.
- Cubic yards. 200 ÷ 27 = 7.407.
- Waste. × 1.10 = 220 cubic feet, or 8.15 cubic yards.
- Order. Bulk is rounded to 0.5 yard steps: 8.5 cubic yards. In bags of 0.5 cubic feet: 220 ÷ 0.5 = 440, rounded up to 440 bags.
Weight of the gravel for a 20x30 base
A cubic yard of crushed gravel weighs about 1.4 tons, so 8.15 cubic yards is about 11.4 tons. A typical pickup carries about a ton or less, so this is more than one load. Ask your supplier for the actual weight if you pay by the ton.
The same area in other materials
| Material | Depth | Cubic yards (no waste) | Bulk order |
|---|---|---|---|
| Gravel | 4 in | 7.41 | 8.5 yd³ |
| Sand | 1 in | 1.85 | 2.5 yd³ |
| Mulch | 3 in | 5.56 | 6.5 yd³ |
| Topsoil | 4 in | 7.41 | 8.5 yd³ |
Preparing the base for a 20x30 area
- Dig and level. Remove grass and soft soil so the finished surface ends up at the height you want.
- Fabric. Landscape fabric under the gravel keeps it from mixing into the soil. For a 20x30 area that is 600 square feet, so buy about 660 square feet to allow for overlaps.
- Edges. The edge of the area is 100 feet long, which is how much edging or restraint you may need if the base is not held by a wall or a slab.
- Lifts. Spread the gravel in layers and compact each one. A 4 inch base is two lifts of about 2 inches, with a plate compactor or a hand tamper.
- Check levels with a straightedge before the surface goes on.
Nearby sizes
| Area | Cubic yards | Bulk order | Bags | |
|---|---|---|---|---|
| 15x15 ft | 225 ft² | 2.78 | 3.5 yd³ | 165 |
| 12x20 ft | 240 ft² | 2.96 | 3.5 yd³ | 176 |
| 16x16 ft | 256 ft² | 3.16 | 3.5 yd³ | 188 |
| 20x20 ft | 400 ft² | 4.94 | 5.5 yd³ | 294 |
Keep going
- The Gravel & mulch calculator lets you enter any size.
- How much gravel for a patio base explains depth, bulk and bags.
- How much waste factor to add to building materials
- How to measure a room for materials
Frequently asked questions
How many cubic yards of gravel for a 20x30 area?
7.41 cubic yards at 4 inches deep, or 8.15 with 10 percent for compaction. A bulk order is usually 8.5 cubic yards.
How many bags of gravel for a 20x30 area?
440 bags of 0.5 cubic feet for a 4 inch base. At 2 inches you need 220.
How many tons of gravel for a 20x30 patio base?
About 11.4 tons, using 1.4 tons per cubic yard. The real weight depends on the stone and moisture.
How deep should the gravel base be?
About 4 inches of compacted gravel is common under patios and walkways. Follow your paver or slab maker's instructions and local practice.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| gravel mulch waste | 10 % | Editable default | contractor rule of thumb, editable |
| gravel mulch bag yield | 0.5 ft3/bag | Editable default | manufacturer label typical |
| bulk order increment | 0.5 yd3 | Editable default | Assumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified. |
| gravel density | 1.4 ton/yd3 | Editable default | Typical loose crushed gravel weight, about 1.4 tons per cubic yard; varies by stone and moisture. Not verified. |
| gravel bulk threshold | 1 yd3 | Editable default | Above about 1 cubic yard, bulk delivery is usually cheaper and quicker than bags. Rule of thumb, not verified. |
Other sizes
- Gravel for a 15x15 patio base3.5 cubic yards in bulk, or 165 bags.
- Gravel for a 12x20 patio base3.5 cubic yards in bulk, or 176 bags.
- Gravel for a 16x16 patio base3.5 cubic yards in bulk, or 188 bags.
- Gravel for a 20x20 patio base5.5 cubic yards in bulk, or 294 bags.
- Gravel & mulch calculatorEnter any size and see every step of the math.