EnoughToBuy Guides

Outdoor

How Much Gravel Do You Need for a 6x6 Patio Base?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 6x6 ft area with a 4 inch gravel base needs about 0.44 cubic yards of gravel. With 10 percent extra for compaction that is 0.49 cubic yards, which a supplier will usually sell as 0.5 cubic yards in bulk, or you can buy 27 bags of 0.5 cubic feet. The gravel weighs roughly 0.7 tons.

Try itGravel & mulch: enter your own sizes
You would buy0.5yd³
  • Gravel, bulk0.5 yd³
Open the full calculator with more options

Gravel for a 6x6 patio base

The area is 36 square feet. At 4 inches deep, the volume is 12 cubic feet. At 0.49 cubic yards with waste, the whole base is under the point where bulk delivery is usually worth it, so bags or a small pickup load can work. 27 bags of 0.5 cubic feet is a lot of lifting, though, so compare it with a small bulk order of 0.5 cubic yards.

6 ft 6 ft 4 in deep
A gravel base for a 6x6 ft area, 4 inches deep: area times depth gives the volume.

Gravel for a 6x6 base by depth

DepthCubic yards (no waste)Bulk orderBags
2 in0.220.5 yd³14
3 in0.330.5 yd³20
4 in0.440.5 yd³27
6 in0.671 yd³40

Most patio bases are about 4 inches thick when compacted, but pavers, walkways and driveways differ. Your paver or slab manufacturer gives a recommended base depth, and soft or wet soil often needs a deeper one.

The math for a 6x6 base

  1. Area. 6 × 6 = 36 square feet.
  2. Volume. 36 × 4 ÷ 12 = 12 cubic feet.
  3. Cubic yards. 12 ÷ 27 = 0.444.
  4. Waste. × 1.10 = 13.2 cubic feet, or 0.49 cubic yards.
  5. Order. Bulk is rounded to 0.5 yard steps: 0.5 cubic yards. In bags of 0.5 cubic feet: 13.2 ÷ 0.5 = 26.4, rounded up to 27 bags.

Weight of the gravel for a 6x6 base

A cubic yard of crushed gravel weighs about 1.4 tons, so 0.49 cubic yards is about 0.7 tons. A typical pickup carries about a ton or less, so this may fit in one load. Ask your supplier for the actual weight if you pay by the ton.

The same area in other materials

MaterialDepthCubic yards (no waste)Bulk order
Gravel4 in0.440.5 yd³
Sand1 in0.110.5 yd³
Mulch3 in0.330.5 yd³
Topsoil4 in0.440.5 yd³

Preparing the base for a 6x6 area

  • Dig and level. Remove grass and soft soil so the finished surface ends up at the height you want.
  • Fabric. Landscape fabric under the gravel keeps it from mixing into the soil. For a 6x6 area that is 36 square feet, so buy about 40 square feet to allow for overlaps.
  • Edges. The edge of the area is 24 feet long, which is how much edging or restraint you may need if the base is not held by a wall or a slab.
  • Lifts. Spread the gravel in layers and compact each one. A 4 inch base is two lifts of about 2 inches, with a plate compactor or a hand tamper.
  • Check levels with a straightedge before the surface goes on.

Nearby sizes

AreaCubic yardsBulk orderBags
8x8 ft64 ft²0.791 yd³47
8x10 ft80 ft²0.991.5 yd³59
10x10 ft100 ft²1.231.5 yd³74
10x12 ft120 ft²1.482 yd³88

Keep going

Frequently asked questions

How many cubic yards of gravel for a 6x6 area?

0.44 cubic yards at 4 inches deep, or 0.49 with 10 percent for compaction. A bulk order is usually 0.5 cubic yards.

How many bags of gravel for a 6x6 area?

27 bags of 0.5 cubic feet for a 4 inch base. At 2 inches you need 14.

How many tons of gravel for a 6x6 patio base?

About 0.7 tons, using 1.4 tons per cubic yard. The real weight depends on the stone and moisture.

How deep should the gravel base be?

About 4 inches of compacted gravel is common under patios and walkways. Follow your paver or slab maker's instructions and local practice.

How Much Gravel Do You Need for a 6x6 Patio Base?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
gravel mulch waste10 %Editable defaultcontractor rule of thumb, editable
gravel mulch bag yield0.5 ft3/bagEditable defaultmanufacturer label typical
bulk order increment0.5 yd3Editable defaultAssumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified.
gravel density1.4 ton/yd3Editable defaultTypical loose crushed gravel weight, about 1.4 tons per cubic yard; varies by stone and moisture. Not verified.
gravel bulk threshold1 yd3Editable defaultAbove about 1 cubic yard, bulk delivery is usually cheaper and quicker than bags. Rule of thumb, not verified.

Other sizes