Retaining wall blocks calculator
Blocks, cap blocks and drainage gravel for a segmental retaining wall from its length and height.
Open the interactive calculatorRetaining wall blocks needed by size
| Length | Main result | Shopping list |
|---|---|---|
| 10 ft | 77 blocks | 77 blocks Wall blocks (12 x 6 in face); 11 caps Cap blocks; 1.5 yd³ Gravel, bulk (backfill) |
| 25 ft | 193 blocks | 193 blocks Wall blocks (12 x 6 in face); 28 caps Cap blocks; 3.5 yd³ Gravel, bulk (backfill) |
| 50 ft | 385 blocks | 385 blocks Wall blocks (12 x 6 in face); 55 caps Cap blocks; 6.5 yd³ Gravel, bulk (backfill) |
| 100 ft | 770 blocks | 770 blocks Wall blocks (12 x 6 in face); 110 caps Cap blocks; 12.5 yd³ Gravel, bulk (backfill) |
| 150 ft | 1,155 blocks | 1,155 blocks Wall blocks (12 x 6 in face); 165 caps Cap blocks; 18.5 yd³ Gravel, bulk (backfill) |
| 200 ft | 1,540 blocks | 1,540 blocks Wall blocks (12 x 6 in face); 220 caps Cap blocks; 24.5 yd³ Gravel, bulk (backfill) |
Every other setting is at the calculator's default. Change them in the calculator for your own job.
Worked example
Using the default sizes, the result is 154 blocks (7 courses of 20, plus 22 cap blocks).
| Item | Quantity | Note |
|---|---|---|
| Wall blocks (12 x 6 in face) | 154 block | 7 courses of 20, includes 10% waste |
| Cap blocks | 22 cap | One cap row along the top |
| Gravel, bulk (backfill) | 2.5 yd³ | ordered in 0.5 yd³ steps |
How it is calculated
- Courses:
ceil(height × 12 ÷ block height) + buried base courses
ceil(3 × 12 ÷ 6) + 1 = 7 courses - Blocks per course:
ceil(length × 12 ÷ block width)
ceil(20 × 12 ÷ 12) = 20 blocks - Blocks without waste:
courses × blocks per course
7 × 20 = 140 blocks - Blocks with waste:
blocks × (1 + waste), rounded up
140 × 1.10 = 154 blocks - Backfill gravel:
length × height × thickness, with waste
20 × 3 × 1.00 ÷ 27 × 1.10 = 2.44 yd³
What to enter
| Field | Unit | Help |
|---|---|---|
| Wall length | ft | Length along the wall. |
| Wall height | ft | Visible height of the finished wall. |
| Block width (along the wall) | in | Width of one block face, from the product label. |
| Block height | in | Height of one block (one course), from the product label. |
| Buried base courses | courses | The first course is set below grade on a compacted gravel base. One buried course is common for low walls. |
| Gravel backfill thickness | in | Drainage gravel behind the wall. Depends on the product and design. |
| Extra for waste | % | Breakage and cut blocks. |
Before you buy
- Estimate only. Retaining walls hold back soil: check local code and ask a licensed engineer.
Frequently asked questions
How do I calculate retaining wall blocks?
Blocks, cap blocks and drainage gravel for a segmental retaining wall from its length and height. Enter your sizes in the calculator. It works out courses (ceil(height × 12 ÷ block height) + buried base courses) and the later steps, then rounds up to what stores sell.
How much waste should I add?
The calculator starts at 10%. Source: Contractor rule of thumb. Not verified. You can change it. More cuts, patterns or uneven ground need more.
Where does the retaining wall waste number come from?
10 percent. Contractor rule of thumb. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Where does the bulk order increment number come from?
0.5 yd3. Assumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Does this calculator show prices?
No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.
Can I build from this estimate?
No. It is a planning estimate. Structural parts depend on local code, soil and loads. Check local code and ask a licensed professional.