Deck boards and joists calculator

Decking boards and joists for a rectangular deck. An estimate for planning, not a structural design.

Open the interactive calculator

Deck boards and joists needed by size

SizeMain resultShopping list
8 × 8 ft20 boards20 boards Deck boards, 16 ft; 7 joists Joists (8 ft long each)
10 × 10 ft25 boards25 boards Deck boards, 16 ft; 9 joists Joists (10 ft long each)
10 × 12 ft29 boards29 boards Deck boards, 16 ft; 9 joists Joists (12 ft long each)
12 × 12 ft29 boards29 boards Deck boards, 16 ft; 10 joists Joists (12 ft long each)
12 × 16 ft39 boards39 boards Deck boards, 16 ft; 10 joists Joists (16 ft long each)
16 × 20 ft48 boards48 boards Deck boards, 16 ft; 13 joists Joists (20 ft long each)
20 × 20 ft60 boards60 boards Deck boards, 16 ft; 16 joists Joists (20 ft long each)
24 × 24 ft86 boards86 boards Deck boards, 16 ft; 19 joists Joists (24 ft long each)

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 29 boards (13 joists of 12 ft).

ItemQuantityNote
Deck boards, 16 ft29 board26 rows, includes 10% waste
Joists (12 ft long each)13 joistevery 16 in

How it is calculated

  1. Board rows: ceil(width x 12 ÷ (board width + gap))
    ceil(12 x 12 ÷ (5.5 + 0.125)) = 26 rows
  2. Linear feet of boards: rows x length
    26 x 16 = 416 ft
  3. Boards to buy: one board per row × (1 + waste), rounded up
    26 × 1.10 = 29 boards
  4. Joists: ceil(length x 12 ÷ spacing) + 1
    ceil(16 x 12 ÷ 16) + 1 = 13 joists

What to enter

FieldUnitHelp
Deck lengthftBoards run along this side.
Deck widthftJoists run along this side.
Board widthinActual width of one deck board. 5.5 in is common for 2x6 style boards.
Gap between boardsinSpace between boards for drainage.
Board length you buychooseStock length at the store.
Joist spacinginCenter to center. The right spacing depends on the boards and local code.
Extra for waste%Cuts and bad boards.

Before you buy

Frequently asked questions

How do I calculate deck boards and joists?

Decking boards and joists for a rectangular deck. An estimate for planning, not a structural design. Enter your sizes in the calculator. It works out board rows (ceil(width x 12 ÷ (board width + gap))) and the later steps, then rounds up to what stores sell.

How much waste should I add?

The calculator starts at 10%. Source: Contractor rule of thumb for deck boards. Not verified. You can change it. More cuts, patterns or uneven ground need more.

Where does the deck waste number come from?

10 percent. Contractor rule of thumb for deck boards. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the deck joist spacing number come from?

16 in. Common joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Can I build from this estimate?

No. It is a planning estimate. Structural parts depend on local code, soil and loads. Check local code and ask a licensed professional.

Guides for this calculator

Common sizes

Related calculators