EnoughToBuy Guides

Concrete & masonry

How Many Bags of Concrete Do You Need for a 40x60 Slab?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 40x60 ft slab that is 4 inches thick holds 800 cubic feet of concrete (29.63 cubic yards). That is 1334 bags of 80 lb mix with no waste, or 1467 bags with a 10 percent allowance. With 60 lb bags buy 1956. With 40 lb bags buy 2934. If you order a truck instead, ask for 32.75 cubic yards of ready-mix.

Try itConcrete slab: enter your own sizes
You would buy1,467bags
  • Concrete mix, 80 lb bags1,467 bags
  • Gravel, bulk (4 in base, if used)29.63 yd³
Open the full calculator with more options

Concrete for a 40x60 slab

The slab covers 2400 square feet. Concrete is sold by volume, so the surface area is multiplied by the thickness: 2400 square feet at 4 inches is 800 cubic feet. At 29.63 cubic yards this is a ready-mix job for most people. 1467 bags would weigh about 117,360 pounds, roughly 58.7 tons, and every bag has to be mixed before the first batch starts to set. A truck delivers about 32.75 cubic yards in one go. Ask your supplier about minimum loads and short-load fees.

40 ft 60 ft Cross-section 4 in concrete 4 in gravel base (if used) soil
A 40x60 ft slab, 4 inches thick: 2400 square feet of surface.

Bags of concrete for a 40x60 slab by thickness

Thickness changes the volume in direct proportion. These figures are for 40x60 ft with 10 percent waste and 80 lb bags, with the ready-mix order in the last column.

ThicknessVolume (ft³)80 lb bagsReady-mix
3 in600110024.5 yd³
4 in800146732.75 yd³
5 in1,000183440.75 yd³
6 in1,200220049 yd³

Four inches is a common thickness for patios, walkways and shed floors. At 6 inches the same 40x60 slab needs 2200 bags. Slabs that carry vehicles or heavy loads are usually thicker and often reinforced, so confirm the thickness with your local building department before you order.

The math for a 40x60 slab

  1. Area. 40 ft × 60 ft = 2400 square feet.
  2. Volume. 2400 × 4 ÷ 12 = 800 cubic feet.
  3. Cubic yards. 800 ÷ 27 = 29.63 cubic yards.
  4. Waste. 800 × 1.10 = 880 cubic feet.
  5. Bags. An 80 lb bag yields about 0.6 cubic feet, so 880 ÷ 0.6 = 1,466.67, which rounds up to 1467 bags.

The 10 percent allowance is a common rule of thumb for uneven ground, flexing forms and mix left in the tools. Without it you would need 1334 bags, so the allowance adds 133.

What else a 40x60 slab needs

  • Gravel base. A 4 inch base under the slab is about 29.63 cubic yards of gravel.
  • Forms. The edge of the slab is 200 feet long. That is 25 boards of 8 feet, or 17 boards of 12 feet, before you cut corners and overlaps.
  • Reinforcement and joints. Wire mesh or rebar, and control joints, depend on local code and how the slab will be used.
  • Curing. Keep the slab damp or covered for several days so it gains strength.

For bag sizes, waste and the bags-or-truck decision in more detail, read how many bags of concrete for a 10x10 slab.

Nearby slab sizes

Sizes close to 40x60 ft, with the same 4 inch thickness and 10 percent waste:

Slab sizeArea80 lb bagsReady-mix
20x30 ft600 ft²3678.25 yd³
24x30 ft720 ft²44010 yd³
30x30 ft900 ft²55012.25 yd³
30x40 ft1200 ft²73416.5 yd³

Keep going

Frequently asked questions

How many bags of concrete for a 40x60 slab?

You need 1334 bags of 80 lb mix with no waste and 1467 with a 10 percent allowance, for a slab 4 inches thick. Buy 1467.

How many 60 lb bags of concrete for a 40x60 slab?

You need 1956 bags of 60 lb mix at 4 inches with 10 percent waste. A 60 lb bag yields about 0.45 cubic feet.

How many cubic yards of concrete is a 40x60 slab?

At 4 inches it is 29.63 cubic yards, or 32.59 with 10 percent waste. A supplier will usually round the order up to 32.75 cubic yards.

How many bags of concrete for a 40x60 slab 6 inches thick?

A 6 inch slab of this size needs 2200 bags of 80 lb mix with 10 percent waste, or 2000 with none.

Should I buy bags or ready-mix for a 40x60 slab?

At 29.63 cubic yards, a ready-mix truck is usually easier than mixing 1467 bags by hand. Compare the delivery cost with the cost of the bags at your own store.

How Many Bags of Concrete Do You Need for a 40x60 Slab?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
concrete bag yield 80lb0.6 ft3Verified 2026-11-13QUIKRETE data sheets list about 0.60 cubic feet per 80 lb bag (for example the Crack Resistant Concrete Mix 1006-80). Yield varies a little by product and by how wet…
concrete bag yield 60lb0.45 ft3Verified 2026-11-13QUIKRETE 5000 High Early Strength data sheet: a 60 lb bag yields about 0.45 cubic feet. Yield varies a little by product.
concrete bag yield 40lb0.3 ft3Verified 2026-11-13QUIKRETE Concrete Mix 1101 data sheet: a 40 lb bag yields approximately 0.30 cubic feet (8.5 L). Yield varies a little with water content.
concrete slab waste0.1 fractionEditable defaultCommon contractor rule of thumb (about 5-10% for spillage and uneven ground). Editable by the user. Not an official figure.
readymix order increment0.25 yd3Editable defaultAssumed ordering step for ready-mix; real minimums vary by supplier. Rule of thumb, not verified.
concrete readymix threshold1 yd3Editable defaultAbove about 1 cubic yard, ready-mix delivery is usually more practical than bags. Rule of thumb, not verified.

Other sizes