Outdoor
How Many Deck Boards Do You Need for a 10x10 Deck?
Quick answer: A 10x10 ft deck, with 5.5 inch wide boards, a 1/8 inch gap and 16 ft boards running the long way, needs 25 deck boards and 9 joists at 16 inch spacing. That includes 10 percent waste on the boards. The surface is 100 square feet.
The structure under a deck, meaning footings, posts, beams, joists and the ledger, is a safety matter that local code controls. These numbers are for planning the boards and joist count only.
- Deck boards, 16 ft25 boards
- Joists (10 ft long each)9 joists
Deck boards for a 10x10 deck
The width of a 10x10 deck is 10 feet, which is 120 inches. With each board and its gap taking 5.625 inches, that is 22 rows. The long side is 10 feet, so one 16 foot board spans each row without a joint and 6 feet of every board is cut off. You need 25 boards with the allowance, or 22 with none.
The math for a 10x10 deck
- Rows. 10 ft × 12 = 120 inches, and 120 ÷ 5.625 = 21.33, rounded up to 22 rows.
- Boards. 22 rows with one 16 foot board in each, plus 10 percent waste: 25 boards.
- Joists. 10 × 12 ÷ 16 = 7.5, rounded up, plus one: 9 joists.
Deck boards for a 10x10 deck by board width
| Board width | Rows | Boards to buy |
|---|---|---|
| 3.5 in | 34 | 38 |
| 5.5 in | 22 | 25 |
| 7.25 in | 17 | 19 |
Actual board widths vary by product. A board sold as a 2×6 or a 5/4×6 is narrower than its name, so measure one before you decide.
Joists by spacing and board length
| Joist spacing | Joists for the 10 ft side |
|---|---|
| 12 in | 11 |
| 16 in | 9 |
| 24 in | 6 |
| Board length | Boards to buy |
|---|---|
| 8 ft | 31 |
| 10 ft | 25 |
| 12 ft | 25 |
| 16 ft | 25 |
| 20 ft | 25 |
Closer joists make a stiffer deck and are often required for composite boards or diagonal layouts. Follow the board maker's instructions and your local code.
Layout choices change the board count
The numbers above assume boards laid straight, parallel to the long side. A diagonal layout wastes more at the edges, and a herringbone or picture-frame border wastes more again.
| Layout | Waste allowance | Boards |
|---|---|---|
| Straight | 10% | 25 |
| Diagonal | 15% | 26 |
| Herringbone or border | 20% | 27 |
The boards of a 10x10 deck add up to 220 linear feet. Each joist is 10 feet long, so 9 joists are 90 feet of framing lumber, and the outside edge of the deck is 40 feet, which sets how much rim board or fascia you need.
Nearby deck sizes
| Deck size | Surface | Boards (16 ft) | Joists |
|---|---|---|---|
| 8x8 ft | 64 ft² | 20 | 7 |
| 8x10 ft | 80 ft² | 20 | 9 |
| 8x12 ft | 96 ft² | 20 | 10 |
| 10x12 ft | 120 ft² | 25 | 10 |
Keep going
- The Deck boards and joists calculator lets you enter any size.
- How many deck boards for a 12x16 deck explains board width, gaps and joists.
- How much waste factor to add to building materials
- How to measure a room for materials
Frequently asked questions
How many deck boards for a 10x10 deck?
25 boards of 16 feet with 5.5 inch width, a 1/8 inch gap and 10 percent waste. Without waste, 22.
How many joists for a 10x10 deck?
At 16 inch spacing you need 9 joists. At 12 inches you need 11, and at 24 inches you need 6.
How many square feet is a 10x10 deck?
100 square feet of surface.
Do I need a permit for a 10x10 deck?
Many places require a permit for a new deck, and some have rules for height and attachment to the house. Ask your local building department before you buy.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| deck waste | 10 percent | Editable default | Contractor rule of thumb for deck boards. Not verified. |
| deck joist spacing | 16 in | Editable default | Common joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified. |