Outdoor
How Many Deck Boards Do You Need for a 12x16 Deck?
Quick answer: A 12 ft × 16 ft deck, with 16 ft boards running the long way, 5.5 inch wide boards and a 1/8 inch gap, needs 29 deck boards and 13 joists at 16 inch spacing. That includes 10 percent waste on the boards. The deck surface is 192 square feet.
A deck is a bigger purchase than most home projects, and the board count is where mistakes show up fastest. The surface boards have to cover the full width in rows, with a small gap between each row. That means you cannot work from the area alone, you also need the width of the board and the width of the gap. The figures below come from the deck calculator.
Important: the structure under a deck, meaning footings, posts, beams, joists, the ledger and the connections, is a safety matter. Local building codes, which are usually based on the International Residential Code, set the sizes and spacing. Treat the numbers in this guide as a planning estimate and check your plans with your local building department or a licensed professional.
- Deck boards, 16 ft29 boards
- Joists (12 ft long each)13 joists
Deck boards by deck size
This chart uses 5.5 inch wide boards, a 1/8 inch gap, 16 ft long boards, 16 inch joist spacing and 10 percent waste. The first number of the size is the direction the boards run.
| Deck size (length × width) | Surface area | Boards | Joists |
|---|---|---|---|
| 12 x 12 ft | 144 ft² | 29 | 10 |
| 16 x 12 ft | 192 ft² | 29 | 13 |
| 16 x 16 ft | 256 ft² | 39 | 13 |
| 20 x 14 ft | 280 ft² | 42 | 16 |
| 24 x 16 ft | 384 ft² | 58 | 19 |
Notice how the 12 × 12 and 16 × 12 decks need the same number of boards. That is because the boards run the length, and the number of rows across the width is the same. The longer deck has longer rows but still uses one 16 ft board per row.
The deck board formula, step by step
For a deck, you count rows of boards first, then buy the right number of boards per row.
- Find the board pitch. Each row takes up the board width plus the gap: 5.5 + 0.125 = 5.625 inches.
- Count the rows. Divide the deck width, in inches, by the pitch and round up: 12 ft × 12 = 144 inches, and 144 ÷ 5.625 = 25.6, which rounds up to 26 rows.
- Work out the boards per row. With 16 ft boards on a 16 ft deck, each row takes one board. The linear footage is 26 rows × 16 ft = 416 feet.
- Add waste. 26 boards × 1.10 = 28.6, which rounds up to 29 boards.
Without waste you would need 26 boards. The waste allowance covers cuts, splits, bowed boards and the board you will cut wrong.
How board width changes the count
Wider boards cover the deck in fewer rows. The calculator allows any width, and these are three common ones:
| Board width | Rows across 12 ft | Boards to buy |
|---|---|---|
| 3.5 in | 40 | 44 |
| 5.5 in | 26 | 29 |
| 7.25 in | 20 | 22 |
The widths in the table are examples. Actual widths vary by product and species, and what is sold as a 2×6 or a 5/4 × 6 is slightly narrower than its name. Use the real width printed on the product, and measure a board before you decide.
Joists: spacing and count
Joists hold up the boards and run across the width of the deck. The joist spacing is measured from the center of one joist to the center of the next. The count is the length in inches divided by the spacing, rounded up, plus one for the final joist.
| Joist spacing | Joists for the 16 ft side |
|---|---|
| 12 in | 17 |
| 16 in | 13 |
| 24 in | 9 |
For a 16 ft side at 16 inches: 16 × 12 ÷ 16 = 12, so you need 12 + 1 = 13 joists. Closer spacing makes a stiffer deck and is often needed for composite boards or diagonal patterns. Ask the board manufacturer what spacing they require, and check local code. The calculator uses 16 inches as a common default, but it is not a rule.
Board length: how long should your boards be?
Boards come in several standard lengths. When the boards are shorter than the deck, you have butt joints in the middle of the run, which should land over a joist. When they are longer, you cut them and waste the offcut.
| Board length | Boards to buy |
|---|---|
| 8 ft | 58 |
| 10 ft | 46 |
| 12 ft | 39 |
| 16 ft | 29 |
| 20 ft | 29 |
The 16 ft boards fit this deck exactly, so they give the lowest count here, tied with 20 ft boards, which leave a 4 ft offcut on every row. A shorter board means more boards but less waste per board, and you have to plan where the joints go. Longer boards leave offcuts that you may not be able to reuse. Pick the length that suits your layout and your budget, and check what your supplier stocks.
The gap between boards
Boards are laid with a small gap so water can drain and the wood can swell. The size of the gap changes the number of rows:
| Gap | Boards to buy |
|---|---|
| 0.0625 in | 29 |
| 0.125 in | 29 |
| 0.25 in | 29 |
For this deck the difference is small, but on a bigger deck it can add up. Wood boards are often installed with a gap that depends on how dry they are when you install them, because they shrink as they dry. Composite boards have their own gap requirements, which are listed in the instructions. Follow the manufacturer's recommendation.
What is not in the board count
The deck surface is only part of the project. The calculator's list of things you will probably also need includes:
- Footings, posts and beams, with sizes and depths set by local code.
- A ledger board, joist hangers and structural fasteners.
- Deck screws or hidden fasteners for the surface.
- Railing, stairs and flashing where they are required.
Make a full list before you buy, because the surface boards are only one part of the job. You may also need to add blocking, a rim board and a fascia to cover the ends of the boards. Count them separately, using your plans.
A deck also needs a stable base for its footings and any adjoining patio. The guide on how much gravel you need for a patio base shows how to size it, and how to measure a room for materials explains how to measure an odd-shaped deck by splitting it into rectangles.
Common deck mistakes
- Ignoring the gap. Calculating from area alone gives too few boards.
- Using the wrong board width. Check the actual width, not the nominal size.
- Forgetting waste. Cuts at the ends and edges use up material, and some boards will be bowed.
- Placing butt joints between joists. Joints should land over a joist so each board end has support.
- Under-spacing for the board type. Some boards need joists closer together.
- Skipping permits. Many places require a permit for a new deck. Check before you buy.
Frequently asked questions
How many deck boards do I need for a 12x16 deck?
With 5.5 inch boards, a 1/8 inch gap and 16 ft boards you need 29 boards, including 10 percent waste. You need 26 with no waste.
How many joists for a 12x16 deck?
At 16 inch spacing across the 16 ft side you need 13 joists. At 12 inch spacing you need 17, and at 24 inches you need 9.
How many deck boards for a 12x12 deck?
A 12 × 12 deck needs 29 boards of 12 ft length or longer, with 10 percent waste.
How many deck boards for a 16x16 deck?
A 16 × 16 deck needs 39 boards at 16 ft each, with 10 percent waste.
How far apart should deck joists be?
Sixteen inches on center is a common choice for many boards. Some products need 12 inches, particularly composite boards or diagonal layouts. Follow the board maker's instructions and local code.
How much waste should I add for decking?
Ten percent is a common rule of thumb for a simple, straight layout. Diagonal and herringbone patterns can require 15 percent or more.
Do I need a permit to build a deck?
In many places, yes. Check with your local building department before you buy materials.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| deck waste | 10 percent | Editable default | Contractor rule of thumb for deck boards. Not verified. |
| deck joist spacing | 16 in | Editable default | Common joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified. |
Keep reading
- How Much Gravel Do You Need for a Patio Base?A 10x10 patio with a 4 inch gravel base needs 1.23 cubic yards, about 74 bags. See the formula, a depth…
- How Much Waste Factor Should You Add to Building Materials?Most projects need 5 to 15 percent extra material. See the waste factor for flooring, tile, drywall, paint…
- How to Measure a Room for Flooring, Paint and TrimLearn how to measure a room for flooring, paint, drywall and baseboard. Get floor area, wall area and…
- How Many Deck Boards Do You Need for an 8x8 Deck?An 8x8 deck with 5.5 inch boards needs 20 boards (16 ft) and 7 joists at 16 inch spacing. See charts for…
- How Many Deck Boards Do You Need for an 8x10 Deck?An 8x10 deck with 5.5 inch boards needs 20 boards (16 ft) and 9 joists at 16 inch spacing. See charts for…
- How Many Deck Boards Do You Need for an 8x12 Deck?An 8x12 deck with 5.5 inch boards needs 20 boards (16 ft) and 10 joists at 16 inch spacing. See charts for…
- How Many Deck Boards Do You Need for a 10x10 Deck?A 10x10 deck with 5.5 inch boards needs 25 boards (16 ft) and 9 joists at 16 inch spacing. See charts for…
- How Many Deck Boards Do You Need for a 10x12 Deck?A 10x12 deck with 5.5 inch boards needs 25 boards (16 ft) and 10 joists at 16 inch spacing. See charts for…
- How Many Deck Boards Do You Need for a 10x14 Deck?A 10x14 deck with 5.5 inch boards needs 25 boards (16 ft) and 12 joists at 16 inch spacing. See charts for…