EnoughToBuy Guides

Outdoor

How Many Deck Boards Do You Need for a 10x14 Deck?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 10x14 ft deck, with 5.5 inch wide boards, a 1/8 inch gap and 16 ft boards running the long way, needs 25 deck boards and 12 joists at 16 inch spacing. That includes 10 percent waste on the boards. The surface is 140 square feet.

The structure under a deck, meaning footings, posts, beams, joists and the ledger, is a safety matter that local code controls. These numbers are for planning the boards and joist count only.

Try itDeck boards and joists: enter your own sizes
You would buy25boards
  • Deck boards, 16 ft25 boards
  • Joists (10 ft long each)12 joists
Open the full calculator with more options

Deck boards for a 10x14 deck

The width of a 10x14 deck is 10 feet, which is 120 inches. With each board and its gap taking 5.625 inches, that is 22 rows. The long side is 14 feet, so one 16 foot board spans each row without a joint and 2 feet of every board is cut off. You need 25 boards with the allowance, or 22 with none.

14 ft 10 ft joists every 16 in (grey, under the boards)
A 10x14 deck from above: boards run the long way, joists sit underneath.

The math for a 10x14 deck

  1. Rows. 10 ft × 12 = 120 inches, and 120 ÷ 5.625 = 21.33, rounded up to 22 rows.
  2. Boards. 22 rows with one 16 foot board in each, plus 10 percent waste: 25 boards.
  3. Joists. 14 × 12 ÷ 16 = 10.5, rounded up, plus one: 12 joists.

Deck boards for a 10x14 deck by board width

Board widthRowsBoards to buy
3.5 in3438
5.5 in2225
7.25 in1719

Actual board widths vary by product. A board sold as a 2×6 or a 5/4×6 is narrower than its name, so measure one before you decide.

Joists by spacing and board length

Joist spacingJoists for the 14 ft side
12 in15
16 in12
24 in8
Board lengthBoards to buy
8 ft43
10 ft34
12 ft29
16 ft25
20 ft25

Closer joists make a stiffer deck and are often required for composite boards or diagonal layouts. Follow the board maker's instructions and your local code.

Layout choices change the board count

The numbers above assume boards laid straight, parallel to the long side. A diagonal layout wastes more at the edges, and a herringbone or picture-frame border wastes more again.

LayoutWaste allowanceBoards
Straight10%25
Diagonal15%26
Herringbone or border20%27

The boards of a 10x14 deck add up to 308 linear feet. Each joist is 10 feet long, so 12 joists are 120 feet of framing lumber, and the outside edge of the deck is 48 feet, which sets how much rim board or fascia you need.

Nearby deck sizes

Deck sizeSurfaceBoards (16 ft)Joists
10x12 ft120 ft²2510
12x12 ft144 ft²2910
10x16 ft160 ft²2513
12x14 ft168 ft²2912

Keep going

Frequently asked questions

How many deck boards for a 10x14 deck?

25 boards of 16 feet with 5.5 inch width, a 1/8 inch gap and 10 percent waste. Without waste, 22.

How many joists for a 10x14 deck?

At 16 inch spacing you need 12 joists. At 12 inches you need 15, and at 24 inches you need 8.

How many square feet is a 10x14 deck?

140 square feet of surface.

Do I need a permit for a 10x14 deck?

Many places require a permit for a new deck, and some have rules for height and attachment to the house. Ask your local building department before you buy.

How Many Deck Boards Do You Need for a 10x14 Deck?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
deck waste10 percentEditable defaultContractor rule of thumb for deck boards. Not verified.
deck joist spacing16 inEditable defaultCommon joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified.

Other sizes