EnoughToBuy Guides

Outdoor

How Many Deck Boards Do You Need for a 12x24 Deck?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 12x24 ft deck, with 5.5 inch wide boards, a 1/8 inch gap and 16 ft boards running the long way, needs 43 deck boards and 19 joists at 16 inch spacing. That includes 10 percent waste on the boards. The surface is 288 square feet.

The structure under a deck, meaning footings, posts, beams, joists and the ledger, is a safety matter that local code controls. These numbers are for planning the boards and joist count only.

Try itDeck boards and joists: enter your own sizes
You would buy43boards
  • Deck boards, 16 ft43 boards
  • Joists (12 ft long each)19 joists
Open the full calculator with more options

Deck boards for a 12x24 deck

The width of a 12x24 deck is 12 feet, which is 144 inches. With each board and its gap taking 5.625 inches, that is 26 rows. The long side is 24 feet, longer than a 16 foot board, so each row needs a butt joint, which should land over a joist, or a 20 foot board. The count uses the calculator's rule for boards shorter than the deck, and the board-length table below shows the other options. You need 43 boards with the allowance, or 39 with none.

24 ft 12 ft joists every 16 in (grey, under the boards)
A 12x24 deck from above: boards run the long way, joists sit underneath.

The math for a 12x24 deck

  1. Rows. 12 ft × 12 = 144 inches, and 144 ÷ 5.625 = 25.6, rounded up to 26 rows.
  2. Boards. 26 rows with the extra boards that the joints need, plus 10 percent waste: 43 boards.
  3. Joists. 24 × 12 ÷ 16 = 18, rounded up, plus one: 19 joists.

Deck boards for a 12x24 deck by board width

Board widthRowsBoards to buy
3.5 in4066
5.5 in2643
7.25 in2033

Actual board widths vary by product. A board sold as a 2×6 or a 5/4×6 is narrower than its name, so measure one before you decide.

Joists by spacing and board length

Joist spacingJoists for the 24 ft side
12 in25
16 in19
24 in13
Board lengthBoards to buy
8 ft86
10 ft69
12 ft58
16 ft43
20 ft35

Closer joists make a stiffer deck and are often required for composite boards or diagonal layouts. Follow the board maker's instructions and your local code.

Layout choices change the board count

The numbers above assume boards laid straight, parallel to the long side. A diagonal layout wastes more at the edges, and a herringbone or picture-frame border wastes more again.

LayoutWaste allowanceBoards
Straight10%43
Diagonal15%45
Herringbone or border20%47

The boards of a 12x24 deck add up to 624 linear feet. Each joist is 12 feet long, so 19 joists are 228 feet of framing lumber, and the outside edge of the deck is 72 feet, which sets how much rim board or fascia you need.

Nearby deck sizes

Deck sizeSurfaceBoards (16 ft)Joists
12x20 ft240 ft²3616
16x16 ft256 ft²3913
14x20 ft280 ft²4216
16x20 ft320 ft²4916

Keep going

Frequently asked questions

How many deck boards for a 12x24 deck?

43 boards of 16 feet with 5.5 inch width, a 1/8 inch gap and 10 percent waste. Without waste, 39.

How many joists for a 12x24 deck?

At 16 inch spacing you need 19 joists. At 12 inches you need 25, and at 24 inches you need 13.

How many square feet is a 12x24 deck?

288 square feet of surface.

Do I need a permit for a 12x24 deck?

Many places require a permit for a new deck, and some have rules for height and attachment to the house. Ask your local building department before you buy.

How Many Deck Boards Do You Need for a 12x24 Deck?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
deck waste10 percentEditable defaultContractor rule of thumb for deck boards. Not verified.
deck joist spacing16 inEditable defaultCommon joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified.

Other sizes