EnoughToBuy Guides

Paint & drywall

How Many Sheets of Drywall Do You Need for a 14x14 Room?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 14x14 ft room with 8 ft ceilings needs 23 sheets of 4×8 drywall for the walls and the ceiling, with 10 percent for waste. Walls alone take 16 sheets and the ceiling alone takes 7. With 4×12 sheets the same room needs 15.

Try itDrywall: enter your own sizes
You would buy23sheets
  • Drywall sheets, 4 × 8 ft23 sheets
  • Joint compound, ready-mixed2 pails
Open the full calculator with more options

Drywall for a 14x14 room

The walls are 448 square feet and the ceiling is 196, which makes 644 square feet in all. 23 sheets is a large order, so check how the sheets will be delivered and carried in. A 4x12 sheet cuts the order to 15 but is heavier and harder to turn in tight halls.

14 ft 8 ft 14 ft deep
A 14x14 ft room with 8 ft walls: walls plus ceiling make up the surface to cover.

The math for a 14x14 room

  1. Walls. 2 × (14 + 14) × 8 = 448 square feet.
  2. Ceiling. 14 × 14 = 196 square feet.
  3. Total. 644 square feet.
  4. Waste. 644 × 1.10 = 708.4 square feet.
  5. Sheets. A 4×8 sheet covers 32 square feet, so 708.4 ÷ 32 = 22.14, rounded up to 23 sheets.

Walls, ceiling and sheet size

What you cover4x8 sheets4x12 sheets
Walls and ceiling2315
Walls only1611
Ceiling only75

A 4×12 sheet covers 48 square feet. Longer sheets mean fewer seams to tape, but they are heavier and harder to carry.

Waste and openings for a 14x14 room

WasteSheets (walls and ceiling)
5%22
10%23
15%24
Openings taken offSheets (walls and ceiling)
0 ft²23
20 ft²22
40 ft²21
60 ft²21

Many installers do not take small openings off, because the cut-outs are rarely reusable and spare sheets are handy.

Hanging the sheets of a 14x14 room

The area method counts the surface and assumes you can reuse offcuts. If you hang 4×8 sheets horizontally, two courses of 4 feet make up an 8 foot wall. Each wall of 14 feet needs 2 sheets per course and each wall of 14 feet needs 2, so the walls take 16 sheets if none of the offcuts can be used. The calculator's figure for the walls, 16 sheets, is lower because offcuts from one wall usually fit the next.

Plan the seams so that the end joints fall on studs and do not line up between the top and bottom courses. Buy the sheets a few days ahead and store them flat and dry in the room.

Nearby room sizes

Room sizeWalls + ceiling4x8 sheets4x12 sheets
12x12 ft room528 ft²1913
12x16 ft room640 ft²2215
14x16 ft room704 ft²2517
15x15 ft room705 ft²2517

Keep going

Frequently asked questions

How many sheets of drywall for a 14x14 room?

23 sheets of 4×8 for walls and ceiling, 16 for the walls only.

How many 4x12 sheets for a 14x14 room?

15 sheets of 4×12 for walls and ceiling.

How many sheets of drywall for the ceiling of a 14x14 room?

7 sheets of 4×8. The ceiling is 196 square feet, and a sheet covers 32.

How much extra drywall should I buy?

Ten percent is a common allowance. At 15 percent this room needs 24 sheets.

How Many Sheets of Drywall Do You Need for a 14x14 Room?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
drywall waste10 %Editable defaultcontractor rule of thumb, editable
drywall sheet 4x832 ft2/sheetVerified 2026-11-13Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 8 ft = 32 ft2.
drywall sheet 4x1248 ft2/sheetVerified 2026-11-13Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 12 ft = 48 ft2.

Other sizes