EnoughToBuy Guides

Paint & drywall

How Many Sheets of Drywall Do You Need for a 16x20 Room?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 16x20 ft room with 8 ft ceilings needs 31 sheets of 4×8 drywall for the walls and the ceiling, with 10 percent for waste. Walls alone take 20 sheets and the ceiling alone takes 11. With 4×12 sheets the same room needs 21.

Try itDrywall: enter your own sizes
You would buy31sheets
  • Drywall sheets, 4 × 8 ft31 sheets
  • Joint compound, ready-mixed2 pails
Open the full calculator with more options

Drywall for a 16x20 room

The walls are 576 square feet and the ceiling is 320, which makes 896 square feet in all. 31 sheets is a large order, so check how the sheets will be delivered and carried in. A 4x12 sheet cuts the order to 21 but is heavier and harder to turn in tight halls.

16 ft 8 ft 20 ft deep
A 16x20 ft room with 8 ft walls: walls plus ceiling make up the surface to cover.

The math for a 16x20 room

  1. Walls. 2 × (16 + 20) × 8 = 576 square feet.
  2. Ceiling. 16 × 20 = 320 square feet.
  3. Total. 896 square feet.
  4. Waste. 896 × 1.10 = 985.6 square feet.
  5. Sheets. A 4×8 sheet covers 32 square feet, so 985.6 ÷ 32 = 30.8, rounded up to 31 sheets.

Walls, ceiling and sheet size

What you cover4x8 sheets4x12 sheets
Walls and ceiling3121
Walls only2014
Ceiling only118

A 4×12 sheet covers 48 square feet. Longer sheets mean fewer seams to tape, but they are heavier and harder to carry.

Waste and openings for a 16x20 room

WasteSheets (walls and ceiling)
5%30
10%31
15%33
Openings taken offSheets (walls and ceiling)
0 ft²31
20 ft²31
40 ft²30
60 ft²29

Many installers do not take small openings off, because the cut-outs are rarely reusable and spare sheets are handy.

Hanging the sheets of a 16x20 room

The area method counts the surface and assumes you can reuse offcuts. If you hang 4×8 sheets horizontally, two courses of 4 feet make up an 8 foot wall. Each wall of 16 feet needs 2 sheets per course and each wall of 20 feet needs 3, so the walls take 20 sheets if none of the offcuts can be used. The calculator's figure for the walls, 20 sheets, is lower because offcuts from one wall usually fit the next.

Plan the seams so that the end joints fall on studs and do not line up between the top and bottom courses. Buy the sheets a few days ahead and store them flat and dry in the room.

Nearby room sizes

Room sizeWalls + ceiling4x8 sheets4x12 sheets
14x16 ft room704 ft²2517
15x15 ft room705 ft²2517
16x16 ft room768 ft²2718
20x20 ft room1,040 ft²3624

Keep going

Frequently asked questions

How many sheets of drywall for a 16x20 room?

31 sheets of 4×8 for walls and ceiling, 20 for the walls only.

How many 4x12 sheets for a 16x20 room?

21 sheets of 4×12 for walls and ceiling.

How many sheets of drywall for the ceiling of a 16x20 room?

11 sheets of 4×8. The ceiling is 320 square feet, and a sheet covers 32.

How much extra drywall should I buy?

Ten percent is a common allowance. At 15 percent this room needs 33 sheets.

How Many Sheets of Drywall Do You Need for a 16x20 Room?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
drywall waste10 %Editable defaultcontractor rule of thumb, editable
drywall sheet 4x832 ft2/sheetVerified 2026-11-13Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 8 ft = 32 ft2.
drywall sheet 4x1248 ft2/sheetVerified 2026-11-13Gypsum Association GA-223: standard gypsum panels are 48 in wide in lengths of 8, 9, 10, 12, 14 and 16 ft. 4 ft x 12 ft = 48 ft2.

Other sizes