Outdoor
How Many Fence Posts and Pickets Do You Need for 160 Feet?
Quick answer: A 160 ft picket fence with posts every 8 ft needs 21 posts, 352 pickets and 40 rails, plus 42 bags of 80 lb concrete if each post is set in 2 bags. The pickets are 5.5 inches wide with a half inch gap and include 10 percent waste.
- Posts21 posts
- Pickets352 pickets
- Rails40 rails
- Concrete mix for post holes, 80 lb bags42 bags
Fence materials for 160 feet
At 160 feet this is a typical yard fence.
| Item | Quantity | How it is worked out |
|---|---|---|
| Posts | 21 | 20 sections plus 1 |
| Pickets | 352 | 320 pickets plus 10% waste |
| Rails | 40 | 20 sections × 2 rails |
| 80 lb concrete bags | 42 | 21 posts × 2 bags |
A run of 160 feet usually has at least one corner or gate. Count each straight run on its own, then subtract one post for every corner, because the corner post is shared by two runs.
The math for 160 feet of fence
- Sections. 160 ÷ 8 = 20, rounded up to 20 sections.
- Posts. One more than the sections: 20 + 1 = 21 posts.
- Pickets. 5.5 + 0.5 = 6 inches per picket, so 2 pickets per foot. 160 × 2 = 320, and with 10 percent waste 352 pickets.
- Rails. 20 sections × 2 rails = 40 rails.
Without the waste allowance the fence needs 320 pickets. The extra 32 cover cuts, splits and mistakes.
Posts and rails for 160 feet by post spacing
Closer posts make a stronger fence but use more posts, rails and concrete.
| Post spacing | Posts | Rails | Concrete bags |
|---|---|---|---|
| 6 ft | 28 | 54 | 56 |
| 8 ft | 21 | 40 | 42 |
| 10 ft | 17 | 32 | 34 |
| Rails per section | Rails for 160 ft |
|---|---|
| 2 rails | 40 |
| 3 rails | 60 |
| 4 rails | 80 |
A fence of about 4 feet usually has 2 rails per section, and taller fences use 3 or 4. Check your design or the instructions of your rails.
160 feet of fence with gates
A gate opening is not covered by pickets, so the calculator takes the gate width out of the fenced run and adds the gate posts.
| Gates | Posts | Pickets | Rails |
|---|---|---|---|
| No gate | 21 | 352 | 40 |
| 1 gate (4 ft) | 22 | 344 | 40 |
| 2 gates (4 ft) | 22 | 335 | 38 |
Gate hardware, such as hinges, a latch and a frame, is a separate purchase. Gate posts usually need to be heavier than line posts.
Laying out 160 feet of posts
Posts at exactly 8 feet leave a short last section: 19 sections of 8 feet and one of 8 feet. To avoid the short section, space the 20 sections evenly at 8 feet instead. Stretch a string line along the fence line, mark each post position on the ground, and check the marks against the property line before you dig.
On a slope, measure along the ground rather than on a map, because the fence length along a hill is longer than the horizontal distance. Call 811 a few working days before digging so underground lines are marked.
Nearby fence lengths
Keep going
- The Fence calculator lets you enter any size.
- How many fence posts and pickets for 100 feet explains spacing, rails and gates.
- How much waste factor to add to building materials
- How to measure a room for materials
Frequently asked questions
How many fence posts for 160 feet?
With posts 8 feet apart you need 21 posts: 20 sections plus one. At 6 feet spacing you need 28 and at 10 feet you need 17.
How many pickets for 160 feet of fence?
352 pickets of 5.5 inches with a half inch gap and 10 percent waste. Without waste, 320.
How many rails for 160 feet of fence?
With 2 rails per section you need 40 rails. With 3 rails per section you need 60.
How many bags of concrete for 160 feet of fence posts?
About 42 bags of 80 lb mix if each of the 21 posts takes 2 bags. The real amount depends on the hole size and depth.
How many fence panels for 160 feet?
Prefabricated panels are sold in set widths, often 6 or 8 feet. Divide 160 by the panel width and round up, then add one post more than the number of panels.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| fence post spacing | 8 ft | Editable default | contractor rule of thumb, editable |
| fence rails per section | 2 rails/section | Editable default | contractor rule of thumb, editable |
| fence post concrete bags | 2 bag/post | Editable default | Rule of thumb for 80 lb concrete bags set per fence post hole; depends on hole size. Not verified. |