Outdoor
How Many Fence Posts and Pickets Do You Need for 200 Feet?
Quick answer: A 200 ft picket fence with posts every 8 ft needs 26 posts, 440 pickets and 50 rails, plus 52 bags of 80 lb concrete if each post is set in 2 bags. The pickets are 5.5 inches wide with a half inch gap and include 10 percent waste.
- Posts26 posts
- Pickets440 pickets
- Rails50 rails
- Concrete mix for post holes, 80 lb bags52 bags
Fence materials for 200 feet
At 200 feet this is a typical yard fence.
| Item | Quantity | How it is worked out |
|---|---|---|
| Posts | 26 | 25 sections plus 1 |
| Pickets | 440 | 400 pickets plus 10% waste |
| Rails | 50 | 25 sections × 2 rails |
| 80 lb concrete bags | 52 | 26 posts × 2 bags |
A run of 200 feet usually has at least one corner or gate. Count each straight run on its own, then subtract one post for every corner, because the corner post is shared by two runs.
The math for 200 feet of fence
- Sections. 200 ÷ 8 = 25, rounded up to 25 sections.
- Posts. One more than the sections: 25 + 1 = 26 posts.
- Pickets. 5.5 + 0.5 = 6 inches per picket, so 2 pickets per foot. 200 × 2 = 400, and with 10 percent waste 440 pickets.
- Rails. 25 sections × 2 rails = 50 rails.
Without the waste allowance the fence needs 400 pickets. The extra 40 cover cuts, splits and mistakes.
Posts and rails for 200 feet by post spacing
Closer posts make a stronger fence but use more posts, rails and concrete.
| Post spacing | Posts | Rails | Concrete bags |
|---|---|---|---|
| 6 ft | 35 | 68 | 70 |
| 8 ft | 26 | 50 | 52 |
| 10 ft | 21 | 40 | 42 |
| Rails per section | Rails for 200 ft |
|---|---|
| 2 rails | 50 |
| 3 rails | 75 |
| 4 rails | 100 |
A fence of about 4 feet usually has 2 rails per section, and taller fences use 3 or 4. Check your design or the instructions of your rails.
200 feet of fence with gates
A gate opening is not covered by pickets, so the calculator takes the gate width out of the fenced run and adds the gate posts.
| Gates | Posts | Pickets | Rails |
|---|---|---|---|
| No gate | 26 | 440 | 50 |
| 1 gate (4 ft) | 27 | 432 | 50 |
| 2 gates (4 ft) | 27 | 423 | 48 |
Gate hardware, such as hinges, a latch and a frame, is a separate purchase. Gate posts usually need to be heavier than line posts.
Laying out 200 feet of posts
Posts at exactly 8 feet leave a short last section: 24 sections of 8 feet and one of 8 feet. To avoid the short section, space the 25 sections evenly at 8 feet instead. Stretch a string line along the fence line, mark each post position on the ground, and check the marks against the property line before you dig.
On a slope, measure along the ground rather than on a map, because the fence length along a hill is longer than the horizontal distance. Call 811 a few working days before digging so underground lines are marked.
Nearby fence lengths
Keep going
- The Fence calculator lets you enter any size.
- How many fence posts and pickets for 100 feet explains spacing, rails and gates.
- How much waste factor to add to building materials
- How to measure a room for materials
Frequently asked questions
How many fence posts for 200 feet?
With posts 8 feet apart you need 26 posts: 25 sections plus one. At 6 feet spacing you need 35 and at 10 feet you need 21.
How many pickets for 200 feet of fence?
440 pickets of 5.5 inches with a half inch gap and 10 percent waste. Without waste, 400.
How many rails for 200 feet of fence?
With 2 rails per section you need 50 rails. With 3 rails per section you need 75.
How many bags of concrete for 200 feet of fence posts?
About 52 bags of 80 lb mix if each of the 26 posts takes 2 bags. The real amount depends on the hole size and depth.
How many fence panels for 200 feet?
Prefabricated panels are sold in set widths, often 6 or 8 feet. Divide 200 by the panel width and round up, then add one post more than the number of panels.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| fence post spacing | 8 ft | Editable default | contractor rule of thumb, editable |
| fence rails per section | 2 rails/section | Editable default | contractor rule of thumb, editable |
| fence post concrete bags | 2 bag/post | Editable default | Rule of thumb for 80 lb concrete bags set per fence post hole; depends on hole size. Not verified. |