Paint & drywall
How Much Paint Do You Need for a Room? A Simple Gallon Guide
Quick answer: A 12 ft × 14 ft room with 8 ft walls, one door and one window needs 3 gallons of paint for two coats on the walls. If you also paint the ceiling, plan for 5 gallons in total: 3 for the walls and 2 for the ceiling. A gallon of paint typically covers about 350 square feet, and the answer includes 10 percent for waste.
Paint is easy to over-buy and awkward to under-buy. Run short in the middle of the last wall and you may find that a new can does not match the first one exactly. The figures below come from the paint calculator.
- Paint3 gal
Paint needed by room size
This chart assumes 8 ft ceilings, one door and one window, two coats, and a coverage of 350 square feet per gallon. The first column of gallons is for walls only, and the second adds the ceiling.
| Room size | Wall area (ft²) | Gallons, walls only | Gallons, walls and ceiling |
|---|---|---|---|
| 10 x 10 ft | 320 | 2 | 3 |
| 12 x 12 ft | 384 | 3 | 4 |
| 12 x 14 ft | 416 | 3 | 5 |
| 14 x 16 ft | 480 | 3 | 5 |
| 16 x 20 ft | 576 | 4 | 7 |
The wall area column is the gross wall area before doors and windows are subtracted. The gallon columns are rounded up to whole gallons, which is how most people end up buying paint. If your room is between two sizes in the chart, use the larger one or run the calculator with your exact measurements.
The paint formula, step by step
The whole job is an area calculation. Paint is sold by the gallon, and each gallon has a stated coverage, so you work out the area you need to cover and divide.
- Find the wall area. Walk the room's perimeter and multiply by the height: 2 × (length + width) × height. For a 12 × 14 room with 8 ft walls that is 2 × (12 + 14) × 8 = 416 square feet.
- Subtract openings. Doors and windows do not need paint. The calculator subtracts 20 square feet for a standard door and 15 square feet for a typical window. With one of each, 416 − 20 − 15 = 381 square feet.
- Multiply by the number of coats. Two coats doubles the area to cover: 381 × 2 = 762 square feet.
- Divide by coverage. 762 ÷ 350 = 2.18 gallons.
- Add waste. Multiply by 1.10 for 10 percent: 2.18 × 1.10 = 2.39 gallons.
- Round up. 2.39 gallons rounds up to 3 gallons.
Because the unrounded figure is 2.39, you could buy 2 gallons and top up with a quart if your color is sold in quarts. Not every color or finish comes in every size, so check before you plan around it.
How many coats do you really need?
Two coats is the standard assumption. The first coat seals and evens out the surface, and the second gives full color and an even sheen. Some situations need more, and some paints are sold as covering in one coat. Here is how the coat count changes the same room:
| Coats | Gallons for walls |
|---|---|
| 1 coat | 2 |
| 2 coats | 3 |
| 3 coats | 4 |
Plan on two coats unless the label of your paint clearly says one coat is enough for your color change. A big jump, such as covering a dark wall with a pale color, often calls for primer first or an extra coat. That is why primer is on the shopping list for most repaints that change color a lot.
Coverage per gallon matters more than you think
The label on the can is the final word on coverage. A common figure is about 350 square feet per gallon, but the number depends on the paint, the surface and how you apply it. Rough, porous or textured walls absorb more paint, so the same gallon covers less. Smooth, previously painted drywall covers more.
| Coverage on the label | Gallons for the same room |
|---|---|
| 250 ft² per gallon | 4 |
| 300 ft² per gallon | 3 |
| 350 ft² per gallon | 3 |
| 400 ft² per gallon | 3 |
If you are unsure, use a lower coverage number. It is far better to end up with half a can than to miss it by a little. You can change coverage in the calculator to match the label on the paint you actually buy.
What to subtract for doors and windows
Subtracting openings saves paint, but only a little, because a door and a window are small compared with four walls. The calculator treats a standard interior door as about 20 square feet and a typical window as about 15 square feet. These are rules of thumb, not measurements of your room. If your windows are large or you have french doors, measure them and adjust.
| Openings in the room | Gallons for walls |
|---|---|
| 0 doors, 0 windows | 3 |
| 1 door, 1 window | 3 |
| 2 doors, 3 windows | 3 |
| 3 doors, 6 windows | 2 |
Many painters do not subtract small openings at all, because the extra paint is useful for trim, touch-ups and patching. If you do not want to bother, set doors and windows to zero and let the waste allowance cover the difference.
Do you need paint for the ceiling and trim?
The ceiling is a separate surface and often a separate paint, usually a flat white. The walls need 3 gallons and the ceiling needs 2, so the room needs 5 gallons in total. Painting a ceiling is also the first job when you repaint a room, because drips fall on the walls you are about to roll.
Trim, baseboards, doors and window casings use a different product, typically a semi-gloss or satin enamel, and they are bought in much smaller quantities, often quarts. Measure the length of trim separately. The baseboard and trim calculator can help with the lengths.
Common mistakes when buying paint
- Counting only floor area. Paint goes on walls, not the floor. Use the perimeter times the height.
- Forgetting the second coat. Most rooms need two. A room that is covered by one gallon in the first coat needs the same again for the second.
- Buying one can, mixing a second later. Different cans of the same color can vary slightly. Mix all your paint together, called boxing, if you buy more than one gallon.
- Ignoring the surface. Fresh drywall, patched areas and bare wood soak up paint. Prime first.
- Skipping the sample. Colors look different on the wall than on a paper chip. Test a small area before you buy the whole job.
- Not reading the label. Coverage claims vary by product. Use the number on your can.
Tips for buying the right amount
- Measure each wall rather than guessing. Rooms are often not square, and the numbers are easy to check with a tape measure. See how to measure a room for materials for L-shaped rooms and alcoves.
- Keep a small amount of leftover paint labeled with the room and color name for touch-ups.
- Buy all the paint for one room at the same time and from the same batch where you can.
- Use a roller cover that suits the surface, because a thicker nap holds more paint but uses more of it on smooth walls.
- Add the primer and sundries to your list: tape, drop cloths, brushes, roller covers and a pole.
Frequently asked questions
How many gallons of paint do I need for a 12x14 room?
For walls only with two coats you need 3 gallons. With the ceiling you need 5 gallons. This assumes 8 ft ceilings, one door, one window and 350 square feet per gallon.
How much paint do I need for a 12x12 room?
A 12 × 12 room with 8 ft walls needs 3 gallons for two coats on the walls. Add the ceiling and the total is 4 gallons.
How much paint do I need for a 10x10 room?
A 10 × 10 room with 8 ft walls needs 2 gallons for two coats on the walls, or 3 gallons with the ceiling.
How many square feet does a gallon of paint cover?
Many interior paints list about 350 square feet per gallon on the can, but the real number depends on the product and the surface. Rough walls take more paint, smooth walls less. Always use the number on your label.
Is it better to buy a little extra paint?
Yes. A 10 percent allowance is a common rule of thumb for waste, touch-ups and the paint that stays in the tray and on the roller. A little extra also helps if you need to fix a scuff later and want to match the color.
How much paint do I need for two coats?
Two coats means covering the wall area twice. The easiest way is to find the area of the walls once, double it, and divide by the coverage on your can, as in the step-by-step formula above.
Do I need primer before painting?
Primer helps on new drywall, bare wood, patched areas, stains, and when you make a big color change. If your walls are in good shape and the color change is small, you may not need it. Check the paint label, because some products are sold as paint and primer in one.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| paint coverage per gallon | 350 ft2/gal | Editable default | manufacturer label typical |
| paint waste | 10 % | Editable default | contractor rule of thumb, editable |
| paint coats | 2 coats | Editable default | contractor rule of thumb, editable |
| paint door area | 20 ft2 | Editable default | Typical interior door opening, about 3 ft x 6.8 ft. Rule of thumb, not verified. |
| paint window area | 15 ft2 | Editable default | Typical window opening, about 3 ft x 5 ft. Rule of thumb, not verified. |
Keep reading
- How to Measure a Room for Flooring, Paint and TrimLearn how to measure a room for flooring, paint, drywall and baseboard. Get floor area, wall area and…
- How Many Sheets of Drywall Do You Need for a Room?A 12x10 room with 8 ft walls needs 17 sheets of 4x8 drywall for walls and ceiling. Get the formula, a size…
- How Much Waste Factor Should You Add to Building Materials?Most projects need 5 to 15 percent extra material. See the waste factor for flooring, tile, drywall, paint…
- How Much Paint Do You Need for an 8x8 Room?An 8x8 ft room with 8 ft walls needs 2 gallons of paint for two coats, or 3 with the ceiling. See the math…
- How Much Paint Do You Need for an 8x10 Room?An 8x10 ft room with 8 ft walls needs 2 gallons of paint for two coats, or 3 with the ceiling. See the math…
- How Much Paint Do You Need for a 10x10 Room?A 10x10 ft room with 8 ft walls needs 2 gallons of paint for two coats, or 3 with the ceiling. See the math…
- How Much Paint Do You Need for a 10x12 Room?A 10x12 ft room with 8 ft walls needs 2 gallons of paint for two coats, or 3 with the ceiling. See the math…
- How Much Paint Do You Need for a 12x12 Room?A 12x12 ft room with 8 ft walls needs 3 gallons of paint for two coats, or 4 with the ceiling. See the math…
- How Much Paint Do You Need for a 12x16 Room?A 12x16 ft room with 8 ft walls needs 3 gallons of paint for two coats, or 5 with the ceiling. See the math…