Outdoor
How Many Pavers Do You Need for a 12x16 Patio?
Quick answer: A 12x16 ft patio covers 192 square feet and needs 908 pavers of 4 x 8 inches with 10 percent extra for cuts (825 without the extra). Under them go 3 cubic yards of base gravel (4 inches compacted) and 1 cubic yard of bedding sand (1 inch), and 56 feet of edge restraint.
- Pavers (4 x 8 in)908 pavers
- Base gravel, bulk (4 in compacted)3 yd³
- Bedding sand, bulk (1 in)1 yd³
- Edge restraint56 ft
Pavers for a 12x16 patio
A 12x16 patio fits a dining table and chairs. The base is 3 cubic yards, which most people order in bulk rather than carry home as 141 bags.
One 4 x 8 inch paver with its joint takes up 0.233 square feet, so 192 square feet holds 824.9 pavers before the extra. Pavers are sold singly, by the square foot, or by the pallet, and pallet counts differ by maker, so ask your supplier how many come on a pallet.
Pavers for a 12x16 patio by paver size
| Paver size | Square feet per paver with joint | Pavers, 10% extra |
|---|---|---|
| 4 x 8 in | 0.233 | 908 |
| 6 x 6 in | 0.261 | 811 |
| 6 x 9 in | 0.388 | 545 |
| 12 x 12 in | 1.021 | 207 |
| 16 x 16 in | 1.806 | 117 |
| 12 x 24 in | 2.031 | 104 |
Bigger pavers mean fewer pieces to set, but each one is heavier, and a pattern such as herringbone needs more cutting. The paver package or the maker's chart gives the exact count per square foot for its own sizes.
Paver base and sand for a 12x16 patio
| Base depth | Cubic yards | Bulk order | Bags of 0.5 ft³ |
|---|---|---|---|
| 4 in | 2.61 | 3 yd³ | 141 |
| 6 in | 3.91 | 4 yd³ | 212 |
| 8 in | 5.21 | 5.5 yd³ | 282 |
The paving guide the calculator follows calls for at least 4 inches of compacted base under a patio, more for driveways, soft soil and cold climates. The base is spread in layers and compacted with a plate compactor. On top goes 1 inch of coarse bedding sand, screeded flat: 0.65 cubic yards here, or about 36 bags of 0.5 cubic feet. For more, read how much sand and gravel under pavers.
The math for a 12x16 patio
- Area. 12 × 16 = 192 square feet.
- One paver. (4 + 0.125) × (8 + 0.125) inches ÷ 144 = 0.2327 square feet with the joint.
- Pavers. 192 ÷ 0.2327 = 824.9, × 1.1 for extra = 908 pavers.
- Base. 192 × 4 ÷ 12 ÷ 27 with the extra = 2.61 cubic yards, ordered as 3 cubic yards.
- Sand. 192 × 1 ÷ 12 ÷ 27 with the extra = 0.65 cubic yards, ordered as 1 cubic yard.
Edges and extras for a 12x16 patio
- Edge restraint. The open edge is 56 feet. Subtract any side that runs against a wall, a step or a slab.
- Polymeric or joint sand fills the gaps after the pavers are down. The bag tells you how many square feet it covers.
- Landscape fabric under the base is optional and depends on the soil.
- Measure odd shapes as rectangles and add them up, as in how to measure a room for materials, then use the pavers calculator for the total.
Nearby patio sizes
| Patio | Area | Pavers (4 x 8 in) | Base gravel |
|---|---|---|---|
| 10x12 ft | 120 ft² | 568 | 2 yd³ |
| 12x12 ft | 144 ft² | 681 | 2 yd³ |
| 14x14 ft | 196 ft² | 927 | 3 yd³ |
| 16x16 ft | 256 ft² | 1210 | 3.5 yd³ |
Keep going
- The Pavers calculator lets you enter any size.
- How many pavers do I need explains paver sizes, joints and patterns.
- How much waste factor to add to building materials
- How to measure a room for materials
Frequently asked questions
How many pavers for a 12x16 patio?
908 pavers of 4 x 8 inches with 10 percent extra. With 12 x 12 inch pavers it is 207.
How much paver base for a 12x16 patio?
2.61 cubic yards at 4 inches with the extra, ordered as 3 cubic yards in bulk.
How many bags of paver base for a 12x16 patio?
About 141 bags of 0.5 cubic feet at 4 inches deep. At that count, bulk delivery is usually easier.
How much sand for a 12x16 patio?
0.65 cubic yards of bedding sand at 1 inch, or about 36 bags of 0.5 cubic feet.
How many 12x12 pavers for a 12x16 patio?
207 pavers of 12 x 12 inches with 10 percent extra.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| paver waste | 10 percent | Editable default | Rule of thumb, editable: extra pavers for cuts at edges and breakage. Not verified. |
| paver base depth | 4 in | Verified 2026-11-15 | Western Interlock paving stone installation guide: 4 to 6 in of compacted base for light vehicular and pedestrian traffic (6 to 12 in for heavy traffic). 4 in is the… |
| paver bedding sand depth | 1 in | Verified 2026-11-15 | Western Interlock paving stone installation guide: a uniform depth of 1 in of coarse concrete sand is recommended for the bedding layer. |
| bulk order increment | 0.5 yd3 | Editable default | Assumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified. |
| gravel mulch bag yield | 0.5 ft3/bag | Editable default | manufacturer label typical |
Other sizes
- Pavers for a 10x12 patio568 pavers of 4 x 8 inches, plus 2 cubic yards of base gravel.
- Pavers for a 12x12 patio681 pavers of 4 x 8 inches, plus 2 cubic yards of base gravel.
- Pavers for a 14x14 patio927 pavers of 4 x 8 inches, plus 3 cubic yards of base gravel.
- Pavers for a 16x16 patio1210 pavers of 4 x 8 inches, plus 3.5 cubic yards of base gravel.
- Pavers calculatorEnter any size and see every step of the math.