Outdoor
How Many Pavers Do You Need for a Patio?
Quick answer: A 12 x 10 ft patio is 120 ft². One 4 x 8 in paver with a 0.125 in joint takes up 0.233 ft², so the patio holds 515.6 pavers. With 10% waste, buy 568 pavers. For another patio, divide its area by the area of one paver plus its joint, add waste and round up. The paver size and joint are example inputs: use the numbers on your pavers' label.
The count depends on three things: the area you are covering, the face size of the paver, and the gap you leave between pavers. The numbers below come from the pavers calculator. They show how the count moves when each of those changes, and what the calculator leaves for you to decide.
- Pavers (4 x 8 in)568 pavers
- Base gravel, bulk (4 in compacted)2 yd³
- Bedding sand, bulk (1 in)0.5 yd³
- Edge restraint44 ft
The formula, step by step
Here is the 12 x 10 ft patio with 4 x 8 in pavers:
- Area. 12 ft × 10 ft = 120 ft².
- Area of one paver with its joint. (4 + 0.125) × (8 + 0.125) ÷ 144 = 0.2327 ft². The division by 144 turns square inches into square feet, and adding the joint to both sides counts the gap around each paver.
- Pavers without waste. 120 ÷ 0.2327 = 515.6 pavers.
- Add waste. 515.6 × 1.1 = 567.1 pavers.
- Round up. 568 pavers.
The calculator uses 10% waste as a starting value. That is a rule of thumb for cuts at the edges and broken pavers, and you can change it.
How many pavers for common patio sizes
The table counts pavers for seven patio sizes at three example paver sizes, all with a 0.125 in joint and 10% waste. The 4 x 8 in column matches this guide's example. The other two columns show how a squarer or larger paver changes the count.
| Patio size | Area | 4 x 8 in pavers | 6 x 6 in pavers | 12 x 12 in pavers |
|---|---|---|---|---|
| 8 x 8 ft | 64 ft² | 303 | 271 | 69 |
| 10 x 10 ft | 100 ft² | 473 | 423 | 108 |
| 10 x 12 ft | 120 ft² | 568 | 507 | 130 |
| 12 x 12 ft | 144 ft² | 681 | 609 | 156 |
| 12 x 16 ft | 192 ft² | 908 | 811 | 207 |
| 16 x 20 ft | 320 ft² | 1513 | 1352 | 345 |
| 20 x 20 ft | 400 ft² | 1891 | 1689 | 431 |
The count is not a straight multiple of the area, because each row is rounded up on its own. Use the table to get a feel for the scale, then enter your own measurements.
How paver size changes the count
On the same 12 x 10 ft patio, the paver you pick changes the count a great deal. Bigger pavers mean fewer pieces to place, and the joint takes a smaller share of each one.
| Paver size | Area of one paver with joint (ft²) | Pavers without waste | Pavers with 10% waste |
|---|---|---|---|
| 4 x 4 in | 0.118 | 1,015.5 | 1118 |
| 4 x 8 in | 0.233 | 515.6 | 568 |
| 6 x 6 in | 0.261 | 460.6 | 507 |
| 6 x 9 in | 0.388 | 309.2 | 341 |
| 8 x 8 in | 0.458 | 261.8 | 288 |
| 12 x 12 in | 1.021 | 117.5 | 130 |
| 12 x 24 in | 2.031 | 59.1 | 65 |
A paver's face size is only one of its dimensions. Thickness does not enter the count, but it does affect how deep you have to dig, so read the label for both. If your pavers are laid in a pattern that uses more than one size, count each size from its share of the area and add the counts.
What the joint does
The joint is the gap between pavers. The calculator adds it to both sides of the paver, so a wider joint means each paver uses a bit more of the patio and you need slightly fewer. The default of 0.125 in is an example. Some pavers have spacer nubs that set the joint, and the label or the maker's instructions say what to use. Enter 0 if yours butt tight.
On this patio, a butt-tight lay needs 594 pavers with waste, and a 0.375 in joint brings that down to 519. Measure the joint your pavers need instead of guessing.
Waste: how many extra pavers
Cuts along the edges and breakage use pavers beyond the bare count. The calculator starts at 10%. Curved edges and patterns that need many angled cuts may call for more, and a simple rectangle laid in a running bond may need less. Your layout decides. The guide on how much waste to add covers how to choose.
| Waste | Pavers to buy | Pavers beyond the bare count |
|---|---|---|
| 0% | 516 | 0 |
| 5% | 542 | 26 |
| 10% | 568 | 52 |
| 15% | 593 | 77 |
| 20% | 619 | 103 |
| 25% | 645 | 129 |
At 10% you buy 568, which is 52 more than the 516 the bare area needs. Unopened spares from the same lot can help if you need to replace a broken paver later.
Pavers by the pallet or the box
Suppliers may sell pavers by the pallet, by the box or by the square foot. The calculator has a field for the number of pavers per pallet or box. It is zero by default, which skips the pallet count. The numbers below are example pallet sizes, not product facts: your supplier's number goes in that field.
| If a pallet holds | Pallets | Pavers you would receive | Spare pavers beyond the order |
|---|---|---|---|
| 100 pavers | 6 | 600 | 32 |
| 250 pavers | 3 | 750 | 182 |
| 400 pavers | 2 | 800 | 232 |
| 500 pavers | 2 | 1000 | 432 |
If your pavers are sold by the square foot, the area to buy is the patio area plus waste: 120 × 1.1 = 132 ft². Check with your supplier whether their coverage already includes the joint and how they count partial pallets.
Patios that are not one rectangle
Split an L, a U or a patio with a bump-out into rectangles, count each and add. Each rectangle rounds up on its own, so the sum can run above one count made from the total area. The example is the 12 x 10 ft patio plus a 6 x 4 ft landing.
| Piece | Size | Pavers |
|---|---|---|
| Main patio | 12 x 10 ft | 568 |
| Landing | 6 x 4 ft | 114 |
| Added together | A + B | 682 |
| Total area counted once | 144 ft² | 681 |
Here the two methods differ by 1 paver, because each piece rounds up on its own. A patio cut into many small pieces can drift further, so compare both before you order. For curved edges, measure the area as closely as you can and raise the waste. The guide on how to measure a room for materials shows the splitting method on a floor, and it works the same way outdoors.
What else the calculator lists
The pavers calculator also returns the base gravel, the bedding sand and the edge restraint for the same patio. For the example it lists 2 yd³ of base gravel, 0.5 yd³ of bedding sand and 44 ft of edge restraint. The 44 ft is the full perimeter of the patio. If one side runs against the house or a curb, subtract that side yourself, or set the edge restraint to none (the line then disappears). The calculator does not know which of your sides are open.
The base depth and sand depth in that list come from one paver maker's installation guide. Your pavers, soil and climate can call for something different, so follow your paver maker's instructions and local conditions. The base gravel guide at how much gravel for a patio base goes through the gravel side in more detail.
Common mistakes when counting pavers
- Dividing by the paver's face area alone. Without the joint, the count comes out too high.
- Using the nominal size. Use the dimensions on the label for the pavers you are actually buying.
- Forgetting waste. The bare count leaves no room for cuts or breakage.
- Rounding each small area on its own and adding. For a patio in pieces, compare with one count made from the total area.
- Counting the area of the whole yard. Measure only the surface the pavers will cover.
- Entering the wrong unit for pallets. Enter the number the supplier gives for the unit you buy, pallet or box.
- Ordering the edge restraint for sides against the house. Subtract the closed sides.
Frequently asked questions
How many pavers do I need for a 12 x 10 ft patio?
With 4 x 8 in pavers and a 0.125 in joint, 568 pavers: 515.6 for the bare area plus 10% waste, rounded up. A different paver size gives a different number, as the table of sizes shows.
How do I calculate how many pavers I need?
Multiply the patio length by its width, divide by the area of one paver plus its joint, add waste and round up. The area of one paver with its joint is (width + joint) × (length + joint) ÷ 144, in square feet.
How many pavers do I need for a 12 x 12 ft patio?
With the same 4 x 8 in pavers, 0.125 in joint and 10% waste, 681 pavers. That is 113 more than the 12 x 10 ft patio, for 24 ft² more area.
How many extra pavers should I buy?
The calculator starts at 10%. Simple rectangles may need less, and curves or patterns may need more. Check your layout before you choose.
Does the number of pavers depend on the joint size?
Slightly. A wider joint spreads the same pavers over more area, so you need fewer. On this patio going from no joint to 0.375 in changes the count from 594 to 519.
How many pavers are on a pallet?
That depends on the paver and the supplier. Enter the number from your supplier in the pavers per pallet field and the calculator returns the pallets. With 400 per pallet, the example patio takes 2 pallets.
Do I need to count the pavers for the base and sand?
No. The pavers are counted from the surface area. The base gravel and bedding sand are separate materials sized by depth, and the calculator lists them next to the paver count.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| paver base depth | 4 in | Verified 2026-11-15 | Western Interlock paving stone installation guide: 4 to 6 in of compacted base for light vehicular and pedestrian traffic (6 to 12 in for heavy traffic). 4 in is the… |
| paver bedding sand depth | 1 in | Verified 2026-11-15 | Western Interlock paving stone installation guide: a uniform depth of 1 in of coarse concrete sand is recommended for the bedding layer. |
| paver waste | 10 percent | Editable default | Rule of thumb, editable: extra pavers for cuts at edges and breakage. Not verified. |
| bulk order increment | 0.5 yd3 | Editable default | Assumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified. |
Keep reading
- How Much Gravel Do You Need for a Patio Base?A 10x10 patio with a 4 inch gravel base needs 1.23 cubic yards, about 74 bags. See the formula, a depth…
- How Much Waste Factor Should You Add to Building Materials?Most projects need 5 to 15 percent extra material. See the waste factor for flooring, tile, drywall, paint…
- How to Measure a Room for Flooring, Paint and TrimLearn how to measure a room for flooring, paint, drywall and baseboard. Get floor area, wall area and…
- How Many Pavers Do You Need for an 8x8 Patio?An 8x8 ft patio needs 303 pavers of 4 x 8 in with 10% extra, 1 yd³ of base gravel and 0.5 yd³ of sand. See…
- How Many Pavers Do You Need for a 10x10 Patio?A 10x10 ft patio needs 473 pavers of 4 x 8 in with 10% extra, 1.5 yd³ of base gravel and 0.5 yd³ of sand…
- How Many Pavers Do You Need for a 10x12 Patio?A 10x12 ft patio needs 568 pavers of 4 x 8 in with 10% extra, 2 yd³ of base gravel and 0.5 yd³ of sand. See…
- How Many Pavers Do You Need for a 12x12 Patio?A 12x12 ft patio needs 681 pavers of 4 x 8 in with 10% extra, 2 yd³ of base gravel and 0.5 yd³ of sand. See…
- How Many Pavers Do You Need for a 12x16 Patio?A 12x16 ft patio needs 908 pavers of 4 x 8 in with 10% extra, 3 yd³ of base gravel and 1 yd³ of sand. See…
- How Many Pavers Do You Need for a 14x14 Patio?A 14x14 ft patio needs 927 pavers of 4 x 8 in with 10% extra, 3 yd³ of base gravel and 1 yd³ of sand. See…