EnoughToBuy Guides

Outdoor

How Many Pavers Do You Need for a 20x20 Patio?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 20x20 ft patio covers 400 square feet and needs 1891 pavers of 4 x 8 inches with 10 percent extra for cuts (1719 without the extra). Under them go 5.5 cubic yards of base gravel (4 inches compacted) and 1.5 cubic yards of bedding sand (1 inch), and 80 feet of edge restraint.

Try itPavers: enter your own sizes
You would buy1,891pavers
  • Pavers (4 x 8 in)1,891 pavers
  • Base gravel, bulk (4 in compacted)5.5 yd³
  • Bedding sand, bulk (1 in)1.5 yd³
  • Edge restraint80 ft
Open the full calculator with more options

Pavers for a 20x20 patio

A 20x20 patio is a large outdoor room. With 1891 small pavers, many people pick a larger paver to cut the count, and the 5.5 cubic yards of base is a bulk delivery and a rented plate compactor.

One 4 x 8 inch paver with its joint takes up 0.233 square feet, so 400 square feet holds 1,718.6 pavers before the extra. Pavers are sold singly, by the square foot, or by the pallet, and pallet counts differ by maker, so ask your supplier how many come on a pallet.

20 ft 20 ft
A 20x20 ft patio of 4 x 8 in pavers: 400 square feet of surface.

Pavers for a 20x20 patio by paver size

Paver sizeSquare feet per paver with jointPavers, 10% extra
4 x 8 in0.2331891
6 x 6 in0.2611689
6 x 9 in0.3881134
12 x 12 in1.021431
16 x 16 in1.806244
12 x 24 in2.031217

Bigger pavers mean fewer pieces to set, but each one is heavier, and a pattern such as herringbone needs more cutting. The paver package or the maker's chart gives the exact count per square foot for its own sizes.

Paver base and sand for a 20x20 patio

Base depthCubic yardsBulk orderBags of 0.5 ft³
4 in5.435.5 yd³294
6 in8.158.5 yd³441
8 in10.8611 yd³587

The paving guide the calculator follows calls for at least 4 inches of compacted base under a patio, more for driveways, soft soil and cold climates. The base is spread in layers and compacted with a plate compactor. On top goes 1 inch of coarse bedding sand, screeded flat: 1.36 cubic yards here, or about 74 bags of 0.5 cubic feet. For more, read how much sand and gravel under pavers.

The math for a 20x20 patio

  1. Area. 20 × 20 = 400 square feet.
  2. One paver. (4 + 0.125) × (8 + 0.125) inches ÷ 144 = 0.2327 square feet with the joint.
  3. Pavers. 400 ÷ 0.2327 = 1,718.6, × 1.1 for extra = 1891 pavers.
  4. Base. 400 × 4 ÷ 12 ÷ 27 with the extra = 5.43 cubic yards, ordered as 5.5 cubic yards.
  5. Sand. 400 × 1 ÷ 12 ÷ 27 with the extra = 1.36 cubic yards, ordered as 1.5 cubic yards.

Edges and extras for a 20x20 patio

  • Edge restraint. The open edge is 80 feet. Subtract any side that runs against a wall, a step or a slab.
  • Polymeric or joint sand fills the gaps after the pavers are down. The bag tells you how many square feet it covers.
  • Landscape fabric under the base is optional and depends on the soil.
  • Measure odd shapes as rectangles and add them up, as in how to measure a room for materials, then use the pavers calculator for the total.

Nearby patio sizes

PatioAreaPavers (4 x 8 in)Base gravel
16x16 ft256 ft²12103.5 yd³
16x20 ft320 ft²15134.5 yd³
20x24 ft480 ft²22697 yd³
24x24 ft576 ft²27238 yd³

Keep going

Frequently asked questions

How many pavers for a 20x20 patio?

1891 pavers of 4 x 8 inches with 10 percent extra. With 12 x 12 inch pavers it is 431.

How much paver base for a 20x20 patio?

5.43 cubic yards at 4 inches with the extra, ordered as 5.5 cubic yards in bulk.

How many bags of paver base for a 20x20 patio?

About 294 bags of 0.5 cubic feet at 4 inches deep. At that count, bulk delivery is usually easier.

How much sand for a 20x20 patio?

1.36 cubic yards of bedding sand at 1 inch, or about 74 bags of 0.5 cubic feet.

How many 12x12 pavers for a 20x20 patio?

431 pavers of 12 x 12 inches with 10 percent extra.

How Many Pavers Do You Need for a 20x20 Patio?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
paver waste10 percentEditable defaultRule of thumb, editable: extra pavers for cuts at edges and breakage. Not verified.
paver base depth4 inVerified 2026-11-15Western Interlock paving stone installation guide: 4 to 6 in of compacted base for light vehicular and pedestrian traffic (6 to 12 in for heavy traffic). 4 in is the…
paver bedding sand depth1 inVerified 2026-11-15Western Interlock paving stone installation guide: a uniform depth of 1 in of coarse concrete sand is recommended for the bedding layer.
bulk order increment0.5 yd3Editable defaultAssumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified.
gravel mulch bag yield0.5 ft3/bagEditable defaultmanufacturer label typical

Other sizes