EnoughToBuy Guides

Outdoor

How Many Deck Boards Do You Need for a 20x20 Deck?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 20x20 ft deck, with 5.5 inch wide boards, a 1/8 inch gap and 16 ft boards running the long way, needs 60 deck boards and 16 joists at 16 inch spacing. That includes 10 percent waste on the boards. The surface is 400 square feet.

The structure under a deck, meaning footings, posts, beams, joists and the ledger, is a safety matter that local code controls. These numbers are for planning the boards and joist count only.

Try itDeck boards and joists: enter your own sizes
You would buy60boards
  • Deck boards, 16 ft60 boards
  • Joists (20 ft long each)16 joists
Open the full calculator with more options

Deck boards for a 20x20 deck

The width of a 20x20 deck is 20 feet, which is 240 inches. With each board and its gap taking 5.625 inches, that is 43 rows. The long side is 20 feet, longer than a 16 foot board, so each row needs a butt joint, which should land over a joist, or a 20 foot board. The count uses the calculator's rule for boards shorter than the deck, and the board-length table below shows the other options. You need 60 boards with the allowance, or 54 with none.

20 ft 20 ft joists every 16 in (grey, under the boards)
A 20x20 deck from above: boards run the long way, joists sit underneath.

The math for a 20x20 deck

  1. Rows. 20 ft × 12 = 240 inches, and 240 ÷ 5.625 = 42.67, rounded up to 43 rows.
  2. Boards. 43 rows with the extra boards that the joints need, plus 10 percent waste: 60 boards.
  3. Joists. 20 × 12 ÷ 16 = 15, rounded up, plus one: 16 joists.

Deck boards for a 20x20 deck by board width

Board widthRowsBoards to buy
3.5 in6793
5.5 in4360
7.25 in3346

Actual board widths vary by product. A board sold as a 2×6 or a 5/4×6 is narrower than its name, so measure one before you decide.

Joists by spacing and board length

Joist spacingJoists for the 20 ft side
12 in21
16 in16
24 in11
Board lengthBoards to buy
8 ft119
10 ft95
12 ft79
16 ft60
20 ft48

Closer joists make a stiffer deck and are often required for composite boards or diagonal layouts. Follow the board maker's instructions and your local code.

Layout choices change the board count

The numbers above assume boards laid straight, parallel to the long side. A diagonal layout wastes more at the edges, and a herringbone or picture-frame border wastes more again.

LayoutWaste allowanceBoards
Straight10%60
Diagonal15%62
Herringbone or border20%65

The boards of a 20x20 deck add up to 860 linear feet. Each joist is 20 feet long, so 16 joists are 320 feet of framing lumber, and the outside edge of the deck is 80 feet, which sets how much rim board or fascia you need.

Nearby deck sizes

Deck sizeSurfaceBoards (16 ft)Joists
16x16 ft256 ft²3913
14x20 ft280 ft²4216
12x24 ft288 ft²4319
16x20 ft320 ft²4916

Keep going

Frequently asked questions

How many deck boards for a 20x20 deck?

60 boards of 16 feet with 5.5 inch width, a 1/8 inch gap and 10 percent waste. Without waste, 54.

How many joists for a 20x20 deck?

At 16 inch spacing you need 16 joists. At 12 inches you need 21, and at 24 inches you need 11.

How many square feet is a 20x20 deck?

400 square feet of surface.

Do I need a permit for a 20x20 deck?

Many places require a permit for a new deck, and some have rules for height and attachment to the house. Ask your local building department before you buy.

How Many Deck Boards Do You Need for a 20x20 Deck?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
deck waste10 percentEditable defaultContractor rule of thumb for deck boards. Not verified.
deck joist spacing16 inEditable defaultCommon joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified.

Other sizes