Outdoor
How Many Fence Posts and Pickets Do You Need for 500 Feet?
Quick answer: A 500 ft picket fence with posts every 8 ft needs 64 posts, 1100 pickets and 126 rails, plus 128 bags of 80 lb concrete if each post is set in 2 bags. The pickets are 5.5 inches wide with a half inch gap and include 10 percent waste.
- Posts64 posts
- Pickets1,100 pickets
- Rails126 rails
- Concrete mix for post holes, 80 lb bags128 bags
Fence materials for 500 feet
At 500 feet this is a long run, so check the ground for slope and plan the delivery of 1100 pickets.
| Item | Quantity | How it is worked out |
|---|---|---|
| Posts | 64 | 63 sections plus 1 |
| Pickets | 1100 | 1,000 pickets plus 10% waste |
| Rails | 126 | 63 sections × 2 rails |
| 80 lb concrete bags | 128 | 64 posts × 2 bags |
A run of 500 feet usually has at least one corner or gate. Count each straight run on its own, then subtract one post for every corner, because the corner post is shared by two runs.
The math for 500 feet of fence
- Sections. 500 ÷ 8 = 62.5, rounded up to 63 sections.
- Posts. One more than the sections: 63 + 1 = 64 posts.
- Pickets. 5.5 + 0.5 = 6 inches per picket, so 2 pickets per foot. 500 × 2 = 1,000, and with 10 percent waste 1100 pickets.
- Rails. 63 sections × 2 rails = 126 rails.
Without the waste allowance the fence needs 1000 pickets. The extra 100 cover cuts, splits and mistakes.
Posts and rails for 500 feet by post spacing
Closer posts make a stronger fence but use more posts, rails and concrete.
| Post spacing | Posts | Rails | Concrete bags |
|---|---|---|---|
| 6 ft | 85 | 168 | 170 |
| 8 ft | 64 | 126 | 128 |
| 10 ft | 51 | 100 | 102 |
| Rails per section | Rails for 500 ft |
|---|---|
| 2 rails | 126 |
| 3 rails | 189 |
| 4 rails | 252 |
A fence of about 4 feet usually has 2 rails per section, and taller fences use 3 or 4. Check your design or the instructions of your rails.
500 feet of fence with gates
A gate opening is not covered by pickets, so the calculator takes the gate width out of the fenced run and adds the gate posts.
| Gates | Posts | Pickets | Rails |
|---|---|---|---|
| No gate | 64 | 1100 | 126 |
| 1 gate (4 ft) | 64 | 1092 | 124 |
| 2 gates (4 ft) | 65 | 1083 | 124 |
Gate hardware, such as hinges, a latch and a frame, is a separate purchase. Gate posts usually need to be heavier than line posts.
Laying out 500 feet of posts
Posts at exactly 8 feet leave a short last section: 62 sections of 8 feet and one of 4 feet. To avoid the short section, space the 63 sections evenly at 7.94 feet instead. Stretch a string line along the fence line, mark each post position on the ground, and check the marks against the property line before you dig.
On a slope, measure along the ground rather than on a map, because the fence length along a hill is longer than the horizontal distance. Call 811 a few working days before digging so underground lines are marked.
Nearby fence lengths
Keep going
- The Fence calculator lets you enter any size.
- How many fence posts and pickets for 100 feet explains spacing, rails and gates.
- How much waste factor to add to building materials
- How to measure a room for materials
Frequently asked questions
How many fence posts for 500 feet?
With posts 8 feet apart you need 64 posts: 63 sections plus one. At 6 feet spacing you need 85 and at 10 feet you need 51.
How many pickets for 500 feet of fence?
1100 pickets of 5.5 inches with a half inch gap and 10 percent waste. Without waste, 1000.
How many rails for 500 feet of fence?
With 2 rails per section you need 126 rails. With 3 rails per section you need 189.
How many bags of concrete for 500 feet of fence posts?
About 128 bags of 80 lb mix if each of the 64 posts takes 2 bags. The real amount depends on the hole size and depth.
How many fence panels for 500 feet?
Prefabricated panels are sold in set widths, often 6 or 8 feet. Divide 500 by the panel width and round up, then add one post more than the number of panels.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| fence post spacing | 8 ft | Editable default | contractor rule of thumb, editable |
| fence rails per section | 2 rails/section | Editable default | contractor rule of thumb, editable |
| fence post concrete bags | 2 bag/post | Editable default | Rule of thumb for 80 lb concrete bags set per fence post hole; depends on hole size. Not verified. |