EnoughToBuy Guides

Outdoor

How Many Pavers Do You Need for a 10x10 Patio?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 10x10 ft patio covers 100 square feet and needs 473 pavers of 4 x 8 inches with 10 percent extra for cuts (430 without the extra). Under them go 1.5 cubic yards of base gravel (4 inches compacted) and 0.5 cubic yards of bedding sand (1 inch), and 40 feet of edge restraint.

Try itPavers: enter your own sizes
You would buy473pavers
  • Pavers (4 x 8 in)473 pavers
  • Base gravel, bulk (4 in compacted)1.5 yd³
  • Bedding sand, bulk (1 in)0.5 yd³
  • Edge restraint40 ft
Open the full calculator with more options

Pavers for a 10x10 patio

A 10x10 patio is a small one, room for a bistro table or a fire pit with a few chairs. It is a weekend job for two people, and the base can come in bags.

One 4 x 8 inch paver with its joint takes up 0.233 square feet, so 100 square feet holds 429.7 pavers before the extra. Pavers are sold singly, by the square foot, or by the pallet, and pallet counts differ by maker, so ask your supplier how many come on a pallet.

10 ft 10 ft
A 10x10 ft patio of 4 x 8 in pavers: 100 square feet of surface.

Pavers for a 10x10 patio by paver size

Paver sizeSquare feet per paver with jointPavers, 10% extra
4 x 8 in0.233473
6 x 6 in0.261423
6 x 9 in0.388284
12 x 12 in1.021108
16 x 16 in1.80661
12 x 24 in2.03155

Bigger pavers mean fewer pieces to set, but each one is heavier, and a pattern such as herringbone needs more cutting. The paver package or the maker's chart gives the exact count per square foot for its own sizes.

Paver base and sand for a 10x10 patio

Base depthCubic yardsBulk orderBags of 0.5 ft³
4 in1.361.5 yd³74
6 in2.042.5 yd³111
8 in2.723 yd³147

The paving guide the calculator follows calls for at least 4 inches of compacted base under a patio, more for driveways, soft soil and cold climates. The base is spread in layers and compacted with a plate compactor. On top goes 1 inch of coarse bedding sand, screeded flat: 0.34 cubic yards here, or about 19 bags of 0.5 cubic feet. For more, read how much sand and gravel under pavers.

The math for a 10x10 patio

  1. Area. 10 × 10 = 100 square feet.
  2. One paver. (4 + 0.125) × (8 + 0.125) inches ÷ 144 = 0.2327 square feet with the joint.
  3. Pavers. 100 ÷ 0.2327 = 429.7, × 1.1 for extra = 473 pavers.
  4. Base. 100 × 4 ÷ 12 ÷ 27 with the extra = 1.36 cubic yards, ordered as 1.5 cubic yards.
  5. Sand. 100 × 1 ÷ 12 ÷ 27 with the extra = 0.34 cubic yards, ordered as 0.5 cubic yards.

Edges and extras for a 10x10 patio

  • Edge restraint. The open edge is 40 feet. Subtract any side that runs against a wall, a step or a slab.
  • Polymeric or joint sand fills the gaps after the pavers are down. The bag tells you how many square feet it covers.
  • Landscape fabric under the base is optional and depends on the soil.
  • Measure odd shapes as rectangles and add them up, as in how to measure a room for materials, then use the pavers calculator for the total.

Nearby patio sizes

PatioAreaPavers (4 x 8 in)Base gravel
8x8 ft64 ft²3031 yd³
10x12 ft120 ft²5682 yd³
12x12 ft144 ft²6812 yd³
12x16 ft192 ft²9083 yd³

Keep going

Frequently asked questions

How many pavers for a 10x10 patio?

473 pavers of 4 x 8 inches with 10 percent extra. With 12 x 12 inch pavers it is 108.

How much paver base for a 10x10 patio?

1.36 cubic yards at 4 inches with the extra, ordered as 1.5 cubic yards in bulk.

How many bags of paver base for a 10x10 patio?

About 74 bags of 0.5 cubic feet at 4 inches deep. At that count, bulk delivery is usually easier.

How much sand for a 10x10 patio?

0.34 cubic yards of bedding sand at 1 inch, or about 19 bags of 0.5 cubic feet.

How many 12x12 pavers for a 10x10 patio?

108 pavers of 12 x 12 inches with 10 percent extra.

How Many Pavers Do You Need for a 10x10 Patio?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
paver waste10 percentEditable defaultRule of thumb, editable: extra pavers for cuts at edges and breakage. Not verified.
paver base depth4 inVerified 2026-11-15Western Interlock paving stone installation guide: 4 to 6 in of compacted base for light vehicular and pedestrian traffic (6 to 12 in for heavy traffic). 4 in is the…
paver bedding sand depth1 inVerified 2026-11-15Western Interlock paving stone installation guide: a uniform depth of 1 in of coarse concrete sand is recommended for the bedding layer.
bulk order increment0.5 yd3Editable defaultAssumed ordering step for bulk gravel, mulch, soil and sand; yards differ. Rule of thumb, not verified.
gravel mulch bag yield0.5 ft3/bagEditable defaultmanufacturer label typical

Other sizes