Roofing shingles calculator

Shingle bundles for a gable or hip roof: footprint, pitch, overhang and waste.

Open the interactive calculator

Roofing shingles needed by size

SizeMain resultShopping list
8 × 8 ft4 bundles4 bundles Shingle bundles
10 × 10 ft6 bundles6 bundles Shingle bundles
10 × 12 ft7 bundles7 bundles Shingle bundles
12 × 12 ft8 bundles8 bundles Shingle bundles
12 × 16 ft10 bundles10 bundles Shingle bundles
16 × 20 ft15 bundles15 bundles Shingle bundles
20 × 20 ft18 bundles18 bundles Shingle bundles
24 × 24 ft25 bundles25 bundles Shingle bundles

Every other setting is at the calculator's default. Change them in the calculator for your own job.

Worked example

Using the default sizes, the result is 47 bundles (15.5 squares (1409 ft² of roof surface)).

ItemQuantityNote
Shingle bundles47 bundle3 bundles per square, includes 10% waste

How it is calculated

  1. Footprint with overhang: (length + 2 x overhang) x (width + 2 x overhang)
    (40 + 2) x (28 + 2) = 1,260 ft²
  2. Pitch factor: sqrt(1 + (rise ÷ 12)²)
    sqrt(1 + (6 ÷ 12)²) = 1.12
  3. Roof surface: footprint x pitch factor
    1260.0 x 1.1180 = 1,408.72 ft²
  4. Roofing squares: surface ÷ 100
    1408.7 ÷ 100 = 14.09 squares
  5. With waste: squares x (1 + waste)
    14.09 x 1.10 = 15.5 squares
  6. Bundles: squares with waste x bundles per square, rounded up
    15.50 x 3 = 46.49 bundles

What to enter

FieldUnitHelp
House lengthftLength of the building footprint under the roof.
House widthftWidth of the footprint. For a gable roof, this is the span the two roof planes cover.
Roof pitchchooseRise per 12 inches of run. 4/12 to 8/12 is common. Steeper roofs have more surface.
OverhangftHow far the roof sticks out past the walls on every side.
Extra for waste%Cuts at hips, valleys and edges. A simple gable roof needs about 10%. Hips, valleys and dormers need 15% or more.

Frequently asked questions

How do I calculate roofing shingles?

Shingle bundles for a gable or hip roof: footprint, pitch, overhang and waste. Enter your sizes in the calculator. It works out footprint with overhang ((length + 2 x overhang) x (width + 2 x overhang)) and the later steps, then rounds up to what stores sell.

How much waste should I add?

The calculator starts at 10%. Source: Contractor rule of thumb for simple roofs. Complex roofs need more. Not verified. You can change it. More cuts, patterns or uneven ground need more.

Where does the roofing bundles per square number come from?

3 bundle/square. GAF: most standard 3-tab and architectural shingles come 3 bundles per roofing square (100 ft2). Heavier premium shingles can need 4. Check the wrapper of your shingles. Checked against its source on 2026-11-13.

Where does the roofing waste number come from?

10 percent. Contractor rule of thumb for simple roofs. Complex roofs need more. Not verified. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator show prices?

No. It gives quantities and a shopping list you can share, print or export. Ask your supplier for prices.

Guides for this calculator

Common sizes

Related calculators