EnoughToBuy Guides

Roofing

How Many Bundles of Shingles Do You Need for a 40x24 House?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 40x24 ft house with a 6/12 roof and a 1 ft overhang has about 1,221 square feet of roof. That is 12.2 roofing squares, or 13.4 squares with 10 percent waste, which is 41 bundles of shingles at 3 bundles per square.

Working on a roof is dangerous. If the roof is steep, high or wet, or you are not experienced, consider hiring a professional. This page is for estimating materials only.

Try itRoofing shingles: enter your own sizes
You would buy41bundles
  • Shingle bundles41 bundles
Open the full calculator with more options

Shingles for a 40x24 house

At 41 bundles the load is manageable, but a bundle is heavy, so plan how the shingles will get onto the roof. The roof is bigger than the footprint of the house, because it slopes and overhangs the walls.

24 ft span Pitch 6/12 12 in run6 in rise
Roof end view at a 6/12 pitch. A steeper pitch means more roof for the same house.

The math for a 40x24 house

  1. Footprint with overhang. (40 + 2) × (24 + 2) = 1,092 square feet.
  2. Pitch factor. At 6/12 it is √(1 + (6 ÷ 12)²) = 1.118.
  3. Roof surface. 1,092 × 1.118 = 1,221 square feet.
  4. Squares. One square is 100 square feet: 12.21 squares.
  5. Waste. × 1.10 = 13.43 squares.
  6. Bundles. 13.43 × 3 = 40.3, rounded up to 41 bundles.

Shingles for a 40x24 house by pitch

PitchPitch factorRoof surfaceBundles (10% waste)
4/121.0541,151 ft²38
6/121.1181,221 ft²41
8/121.2021,312 ft²44
12/121.4141,544 ft²51

Waste and overhang

WasteSquaresBundles
5%12.839
10%13.441
15%1443
20%14.744
OverhangBundles
0 ft36
1 ft41
2 ft46

A simple gable roof can get by with about 10 percent waste. Hips, valleys, dormers and chimneys add cuts, so use 15 percent or more for a complex roof.

What else the roof needs

Underlayment, starter strip, ridge cap shingles, drip edge, nails and flashing are separate items. Check local code for wind and fire ratings.

Eaves, ridge and rakes for a 40x24 house

For a simple gable roof with the ridge along the 40 foot side, the eaves are about 84 feet in total, the ridge is about 40 feet long, and each of the four rake edges is about 14.5 feet along the slope. These lengths help you size the starter strip, the ridge cap shingles and the drip edge. A hip roof or a roof with dormers has different lengths, so measure your own.

Nearby house sizes

House sizeRoof surfaceSquares (10% waste)Bundles
30x24 ft house930 ft²10.231
32x24 ft house988 ft²10.933
36x26 ft house1,190 ft²13.140
40x28 ft house1,409 ft²15.547

Keep going

Frequently asked questions

How many bundles of shingles for a 40x24 house?

About 41 bundles at a 6/12 pitch with a 1 foot overhang and 10 percent waste.

How many squares of shingles for a 40x24 house?

12.2 squares before waste, or 13.4 with 10 percent. Most shingles have 3 bundles per square.

Do I need underlayment for a 40x24 house?

Most roofs get underlayment under the shingles. It is sold in rolls, and the amount depends on the roof area, here about 1,221 square feet. Check the coverage printed on the roll and your local code.

How many bundles at a steeper pitch?

At 8/12 the same house needs 44 bundles, and at 12/12 it needs 51.

How Many Bundles of Shingles Do You Need for a 40x24 House?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
roofing bundles per square3 bundle/squareVerified 2026-11-13GAF: most standard 3-tab and architectural shingles come 3 bundles per roofing square (100 ft2). Heavier premium shingles can need 4. Check the wrapper of your shingles.
roofing waste10 percentEditable defaultContractor rule of thumb for simple roofs. Complex roofs need more. Not verified.

Other sizes