EnoughToBuy Guides

Roofing

How Many Bundles of Shingles Do You Need for a 36x26 House?

By the EnoughToBuy teamUpdated November 15, 20263 min readSources and assumptions

Quick answer: A 36x26 ft house with a 6/12 roof and a 1 ft overhang has about 1,190 square feet of roof. That is 11.9 roofing squares, or 13.1 squares with 10 percent waste, which is 40 bundles of shingles at 3 bundles per square.

Working on a roof is dangerous. If the roof is steep, high or wet, or you are not experienced, consider hiring a professional. This page is for estimating materials only.

Try itRoofing shingles: enter your own sizes
You would buy40bundles
  • Shingle bundles40 bundles
Open the full calculator with more options

Shingles for a 36x26 house

At 40 bundles the load is manageable, but a bundle is heavy, so plan how the shingles will get onto the roof. The roof is bigger than the footprint of the house, because it slopes and overhangs the walls.

26 ft span Pitch 6/12 12 in run6 in rise
Roof end view at a 6/12 pitch. A steeper pitch means more roof for the same house.

The math for a 36x26 house

  1. Footprint with overhang. (36 + 2) × (26 + 2) = 1,064 square feet.
  2. Pitch factor. At 6/12 it is √(1 + (6 ÷ 12)²) = 1.118.
  3. Roof surface. 1,064 × 1.118 = 1,190 square feet.
  4. Squares. One square is 100 square feet: 11.9 squares.
  5. Waste. × 1.10 = 13.09 squares.
  6. Bundles. 13.09 × 3 = 39.3, rounded up to 40 bundles.

Shingles for a 36x26 house by pitch

PitchPitch factorRoof surfaceBundles (10% waste)
4/121.0541,122 ft²38
6/121.1181,190 ft²40
8/121.2021,279 ft²43
12/121.4141,505 ft²50

Waste and overhang

WasteSquaresBundles
5%12.538
10%13.140
15%13.742
20%14.343
OverhangBundles
0 ft35
1 ft40
2 ft45

A simple gable roof can get by with about 10 percent waste. Hips, valleys, dormers and chimneys add cuts, so use 15 percent or more for a complex roof.

What else the roof needs

Underlayment, starter strip, ridge cap shingles, drip edge, nails and flashing are separate items. Check local code for wind and fire ratings.

Eaves, ridge and rakes for a 36x26 house

For a simple gable roof with the ridge along the 36 foot side, the eaves are about 76 feet in total, the ridge is about 36 feet long, and each of the four rake edges is about 15.7 feet along the slope. These lengths help you size the starter strip, the ridge cap shingles and the drip edge. A hip roof or a roof with dormers has different lengths, so measure your own.

Nearby house sizes

House sizeRoof surfaceSquares (10% waste)Bundles
30x24 ft house930 ft²10.231
32x24 ft house988 ft²10.933
40x24 ft house1,221 ft²13.441
40x28 ft house1,409 ft²15.547

Keep going

Frequently asked questions

How many bundles of shingles for a 36x26 house?

About 40 bundles at a 6/12 pitch with a 1 foot overhang and 10 percent waste.

How many squares of shingles for a 36x26 house?

11.9 squares before waste, or 13.1 with 10 percent. Most shingles have 3 bundles per square.

Do I need underlayment for a 36x26 house?

Most roofs get underlayment under the shingles. It is sold in rolls, and the amount depends on the roof area, here about 1,190 square feet. Check the coverage printed on the roll and your local code.

How many bundles at a steeper pitch?

At 8/12 the same house needs 43 bundles, and at 12/12 it needs 50.

How Many Bundles of Shingles Do You Need for a 36x26 House?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
roofing bundles per square3 bundle/squareVerified 2026-11-13GAF: most standard 3-tab and architectural shingles come 3 bundles per roofing square (100 ft2). Heavier premium shingles can need 4. Check the wrapper of your shingles.
roofing waste10 percentEditable defaultContractor rule of thumb for simple roofs. Complex roofs need more. Not verified.

Other sizes