EnoughToBuy Guides

Roofing

How Many Bundles Are in a Square of Shingles?

By the EnoughToBuy teamUpdated November 15, 20265 min readSources and assumptions

Quick answer: One roofing square is 100 ft² of roof, and the calculator uses 3 bundles per square, so one bundle covers about 33.3 ft². To convert, multiply squares by 3: 20 squares is 60 bundles before waste, and 66 bundles with 10 percent waste. The 32 x 24 ft example roof is 10.5 squares with waste, or 32 bundles.

A "square" is the unit roofers use to talk about roof area. A "bundle" is the unit you actually carry up the ladder. Moving between them is one multiplication, but the two places people go wrong are the waste allowance and the rounding. The tables below come from the roofing calculator and its constants. If you have a house and want the whole answer from its dimensions, start with how many bundles of shingles for a roof.

Try itRoofing shingles: enter your own sizes
You would buy32bundles
  • Shingle bundles32 bundles
Open the full calculator with more options

Squares to bundles in one step

One square is 100 ft² of roof surface. Multiply the number of squares by the bundles per square (3) and you have the bundles before waste. Multiply by the waste factor first and round up, and you have what to buy.

SquaresRoof surface (ft²)Bundles, no wasteBundles with 10% waste
110034
55001517
101,0003033
151,5004550
202,0006066
252,5007583
303,0009099

The waste column rounds up because you cannot buy part of a bundle. Notice that waste does not always add a whole bundle: it adds a fraction of the total, and the rounding decides how many bundles that fraction is worth.

24 ft span Pitch 5/12 12 in run5 in rise
End view of the example roof at a 5/12 pitch. The squares come from the sloping surface, not from the flat floor plan.

Bundles to squares and square feet

Going the other way, divide bundles by 3. This is useful when a leftover pallet or a store count is all you know, or when you want to check an order against a roof area.

BundlesSquaresRoof surface covered (ft²)Squares of roof after holding back 10% waste
51.71671.5
103.33333
206.76676.1
30101,0009.1
45151,50013.6
60202,00018.2
90303,00027.3

The last column is the part people forget. If you hold 10 percent of the shingles back for cuts, ridge and edges, 30 bundles (10 squares of shingles) roof only 9.1 squares of actual roof surface.

From square feet of roof to bundles

If you already know the roof area in square feet, the conversion has three steps: divide by 100 to get squares, multiply by 1.1 for the waste, then multiply by 3 and round up.

Roof surface (ft²)SquaresSquares with 10% wasteBundles to buy
60066.620
1,000101133
1,2001213.240
1,5001516.550
1,8001819.860
2,000202266
2,4002426.480
3,000303399

Use the roof surface, not the floor area of the house. A sloping roof has more surface than the floor plan under it, which the next section shows.

The conversion formula, step by step

Here is the conversion for a 32 x 24 ft house with a 5/12 roof and a 1 ft overhang. The calculator first turns the house into roof surface: the footprint with overhang, 884 ft², times the pitch factor of 1.083. Roof pitch and shingles explains that part. The conversion starts from the surface.

  1. Roof surface. 958 ft².
  2. Squares. 958 ÷ 100 = 9.58 squares.
  3. Add waste. 9.58 × 1.1 = 10.53 squares.
  4. Convert to bundles. 10.53 × 3 = 31.6 bundles.
  5. Round up. You buy 32 bundles.

Round only in the last step. The squares stay as decimals until then. How to measure a room for materials covers splitting an odd shape into rectangles before you start.

Ordering by the bundle or by the square

Some quotes and lists are in squares, others in bundles. For the example roof the exact need is 10.53 squares, which is 31.6 bundles. The two ways of ordering give slightly different results:

How you orderAmountBundles you end up with
By the bundle, rounded up32 bundles32
By whole squares, rounded up11 squares33

Ordering by whole squares gives 1 more bundle here. That is not a mistake, only a different rounding step. If you are buying by the square, ask whether the supplier splits squares into bundles. The waste factor guide covers how much margin to keep.

When the wrapper says something different

The calculator uses 3 bundles per square. Its source describes that as the usual packing for standard shingles and says that heavier shingles can pack differently, so the wrapper on the shingles you plan to buy is the final word. If the wrapper gives another count, use the same formula with that number. For the example roof, a wrapper that listed 4 bundles per square would turn 10.53 squares into 43 bundles instead of 32.

Do not mix counts. Pick the product first, read its wrapper, then convert. Shingles from a different production run may not match in color, so order the full amount at once.

Common conversion mistakes

  1. Converting the floor area. The squares must come from the sloping roof surface, not from the footprint of the house.
  2. Adding waste twice. Add it once, either to the squares or to the bundles, not to both.
  3. Rounding too early. Round up only at the end. Rounding the squares up and then the bundles up buys extra.
  4. Mixing up squares and bundles on a quote. Check the unit on every line before you compare numbers.
  5. Using a different product's count. The bundles per square depend on the product. Read the wrapper.
  6. Forgetting what the calculator leaves out. It counts shingle bundles only. Everything else the roof needs comes from your product instructions and local code.

Frequently asked questions

How many bundles are in a square of shingles?

The calculator uses 3 bundles per square, and one square is 100 ft² of roof. Check the wrapper of your shingles, because the count depends on the product.

How many squares are in 30 bundles of shingles?

Divide by 3: 30 bundles is 10 squares, which covers 1,000 ft² of roof before any waste allowance.

How many bundles do I need for 20 squares?

60 bundles with no waste, and 66 bundles with 10 percent waste.

Why is my bundle count not a whole number of squares?

Because the calculator rounds the bundles, not the squares. The example roof needs 10.53 squares with waste, which is 31.6 bundles, rounded up to 32. Rounding to whole squares first would give 33 bundles.

Is a roofing square 100 square feet of floor?

No. It is 100 ft² of sloping roof surface. The example house has 884 ft² of footprint with its overhang, but 958 ft² of roof, which is 9.58 squares.

Do I add waste to squares or to bundles?

Either, once. The calculator adds it to the squares and then converts to bundles, as in the steps above.

How many squares is a 32 x 24 ft house?

With a 5/12 roof and a 1 ft overhang, the roof is 9.6 squares, or 10.5 squares with 10 percent waste.

How Many Bundles Are in a Square of Shingles?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
roofing bundles per square3 bundle/squareVerified 2026-11-13GAF: most standard 3-tab and architectural shingles come 3 bundles per roofing square (100 ft2). Heavier premium shingles can need 4. Check the wrapper of your shingles.
roofing waste10 percentEditable defaultContractor rule of thumb for simple roofs. Complex roofs need more. Not verified.

Keep reading