Roofing
How Many Bundles of Shingles Do You Need for a Roof?
Quick answer: A house that measures 40 ft × 28 ft, with a 6/12 roof and a 1 ft overhang, has about 1,409 square feet of roof. That is 14.1 roofing squares, or 15.5 squares with 10 percent waste, which is 47 bundles of shingles at 3 bundles per square. A steeper roof needs more, because the surface is larger than the footprint.
Roofing is one of the few jobs where the quantity depends on geometry more than on room size. The roof is tilted, so its surface is bigger than the area of the house below it, and the steeper the roof, the bigger that difference. The figures below come from the roofing calculator.
Safety first. Working on a roof is dangerous. Falls from roofs are a leading cause of deaths in residential construction, according to OSHA's residential fall protection resources. If you are not experienced, or the roof is steep, high or wet, consider hiring a professional. This guide is for estimating the materials only.
- Shingle bundles47 bundles
Shingle bundles by roof pitch
The table keeps the same 40 ft × 28 ft footprint and 1 ft overhang and changes only the pitch. The pitch factor is how much bigger the sloping surface is than the flat footprint.
| Pitch | Pitch factor | Roof surface (ft²) | Squares (no waste) | Bundles (10% waste) |
|---|---|---|---|---|
| 3/12 | 1.031 | 1,299 | 13 | 43 |
| 4/12 | 1.054 | 1,328 | 13.3 | 44 |
| 6/12 | 1.118 | 1,409 | 14.1 | 47 |
| 8/12 | 1.202 | 1,514 | 15.1 | 50 |
| 9/12 | 1.25 | 1,575 | 15.8 | 52 |
| 12/12 | 1.414 | 1,782 | 17.8 | 59 |
Pitch is written as rise over run: a 6/12 roof rises 6 inches for every 12 inches it runs horizontally. A flat roof has a pitch factor of 1, and the factor grows as the roof gets steeper. A 12/12 roof needs about 37 percent more bundles than a 3/12 roof of the same size.
What is a roofing square?
Roofing is sold and priced by the square. One roofing square is 100 square feet of roof. Shingles are packed in bundles, and most standard shingles come in 3 bundles per square, according to GAF's explanation of how many bundles are in a square. Some heavier premium shingles need 4 bundles per square, so read the wrapper on the shingles you plan to buy.
The roofing formula, step by step
For a simple gable or hip roof with one pitch, the steps are:
- Find the footprint with overhang. Add the overhang to each side of the house. For 40 × 28 ft and a 1 ft overhang: (40 + 2) × (28 + 2) = 1,260 square feet.
- Find the pitch factor. The slope makes the surface longer than the footprint. The factor is the square root of 1 + (rise ÷ 12)². For a 6/12 roof that is √(1 + (6 ÷ 12)²) = 1.118.
- Find the roof surface. Footprint × pitch factor = 1,260 × 1.118 = 1,409 square feet.
- Convert to squares. 1,409 ÷ 100 = 14.1 squares.
- Add waste. 14.1 × 1.1 = 15.5 squares.
- Convert to bundles and round up. 15.5 × 3 = 46.5, which rounds up to 47 bundles.
The pitch factor is the same idea as the hypotenuse of a right triangle: the roof rises as it runs, and the sloping length is longer than the run. This method also works for hip roofs as long as every plane has the same pitch.
How the overhang changes the answer
Roofs extend past the walls to shed water away from them. That overhang adds surface to every side. In this example:
| Overhang | Bundles |
|---|---|
| 0 ft | 42 |
| 1 ft | 47 |
| 2 ft | 52 |
Measure the overhang on your own roof, or check your plans. Do not count the gutter.
Roof size examples
| House size | Roof surface (ft²) | Squares (no waste) | Bundles (10% waste) |
|---|---|---|---|
| 30 x 24 ft | 930 | 9.3 | 31 |
| 36 x 26 ft | 1,190 | 11.9 | 40 |
| 40 x 28 ft | 1,409 | 14.1 | 47 |
| 50 x 30 ft | 1,860 | 18.6 | 62 |
| 60 x 40 ft | 2,911 | 29.1 | 97 |
These assume a 6/12 pitch and a 1 ft overhang. Use your own pitch for a better number.
How much waste to allow on a roof
Cuts at the edges, hips, valleys and the ridge create waste, and every roof has some. A simple gable roof with few cuts can get by with about 10 percent, which is the calculator's starting point. Roofs with hips, valleys, dormers, chimneys or skylights have more cuts and need more.
| Waste allowance | Squares | Bundles |
|---|---|---|
| 5% | 14.8 | 45 |
| 10% | 15.5 | 47 |
| 15% | 16.2 | 49 |
| 20% | 16.9 | 51 |
If your roof is complex, use 15 percent or more and talk to your roofer or supplier. Never buy exactly what the formula gives you. A short order stalls a job, and shingles from a different production run may not match in color.
What else you need to buy
Shingles are not the whole roof. The calculator's list of items you will probably also need includes:
- Underlayment and ice-and-water shield at eaves and valleys.
- A starter strip, ridge cap shingles and drip edge.
- Roofing nails of the right length, flashing and vent boots.
Check local code for wind and fire rating requirements, which can affect the shingles you need. Quantities for these items depend on the layout of your roof. Your supplier can help you size them, usually from the length of your eaves, rakes and ridge.
To decide how much waste suits your roof, read how much waste factor to add to building materials. For taking accurate dimensions of a house or an outbuilding, see how to measure a room for materials, which also covers splitting odd shapes into rectangles.
Common roofing mistakes
- Using the footprint alone. The sloping surface is bigger than the house. Include the pitch.
- Forgetting the overhang. It adds surface on every side.
- Not allowing for waste. A short order delays the job.
- Confusing squares and bundles. One square usually has 3 bundles.
- Ignoring the tear-off. Removing old shingles creates debris that needs disposal, and the deck underneath may need repair.
- Mixing production lots. Shingles from different lots can look different. Order the full amount at once.
- Skipping permits. Many places require a permit for a re-roof.
Frequently asked questions
How many bundles of shingles do I need for a 1,500 square foot roof?
A roof surface of 1,500 square feet is 15 squares. At 3 bundles per square that is 45 bundles before waste, and about 50 with 10 percent waste.
How many bundles of shingles for a 40x28 house?
With a 6/12 pitch and a 1 ft overhang you need about 47 bundles with 10 percent waste.
How many bundles are in a square of shingles?
Most standard shingles have 3 bundles per square, though some premium shingles have 4. Check the wrapper.
How do I calculate roof pitch?
Pitch is the rise over 12 inches of run. Hold a level flat, with one end against the roof, and mark 12 inches along it. Then measure straight up or down from that mark to the roof surface. If it is 6 inches, the roof is 6/12.
How much waste should I add for roofing shingles?
Ten percent is a common allowance for a simple gable roof. Complicated roofs need 15 percent or more.
Does a steeper roof need more shingles?
Yes. A steeper roof has more surface area for the same footprint. A 12/12 roof needs more shingles than a 3/12 roof of the same size.
How many square feet does a bundle of shingles cover?
With 3 bundles per square, one bundle covers about 33.3 square feet of roof. The exposed coverage can vary slightly by product.

Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| roofing bundles per square | 3 bundle/square | Verified 2026-11-13 | GAF: most standard 3-tab and architectural shingles come 3 bundles per roofing square (100 ft2). Heavier premium shingles can need 4. Check the wrapper of your shingles. |
| roofing waste | 10 percent | Editable default | Contractor rule of thumb for simple roofs. Complex roofs need more. Not verified. |
Keep reading
- How Much Waste Factor Should You Add to Building Materials?Most projects need 5 to 15 percent extra material. See the waste factor for flooring, tile, drywall, paint…
- How to Measure a Room for Flooring, Paint and TrimLearn how to measure a room for flooring, paint, drywall and baseboard. Get floor area, wall area and…
- How Many Deck Boards Do You Need for a 12x16 Deck?A 12x16 deck with 5.5 inch boards needs 29 boards (16 ft long) and 13 joists at 16 inch spacing. See the…
- How Many Bundles of Shingles Do You Need for a 30x24 House?A 30x24 ft house with a 6/12 roof and 1 ft overhang needs about 31 bundles of shingles (10.2 squares). See…
- How Many Bundles of Shingles Do You Need for a 32x24 House?A 32x24 ft house with a 6/12 roof and 1 ft overhang needs about 33 bundles of shingles (10.9 squares). See…
- How Many Bundles of Shingles Do You Need for a 36x26 House?A 36x26 ft house with a 6/12 roof and 1 ft overhang needs about 40 bundles of shingles (13.1 squares). See…
- How Many Bundles of Shingles Do You Need for a 40x24 House?A 40x24 ft house with a 6/12 roof and 1 ft overhang needs about 41 bundles of shingles (13.4 squares). See…
- How Many Bundles of Shingles Do You Need for a 40x30 House?A 40x30 ft house with a 6/12 roof and 1 ft overhang needs about 50 bundles of shingles (16.5 squares). See…
- How Many Bundles of Shingles Do You Need for a 44x28 House?A 44x28 ft house with a 6/12 roof and 1 ft overhang needs about 51 bundles of shingles (17 squares). See…