EnoughToBuy Guides

Outdoor

Deck Joist Spacing, 12 vs 16 Inches: How Many Joists Do You Need?

By the EnoughToBuy teamUpdated November 19, 20268 min readSources and assumptions

Quick answer: On a deck 18 ft long and 12 ft wide, joists every 12 in take 19 joists, and joists every 16 in take 15 joists. That is 4 more joists at 12 in, each 12 ft long. The deck boards do not change: 33 boards either way. The right spacing comes from your local code, your lumber and your board maker, so treat both spacings as what-if inputs and not as a recommendation.

Joist spacing is one number that moves the framing list. Closer joists mean more pieces to buy, cut and hang. Wider joists mean fewer pieces, but they may not suit your boards or your plans. This guide shows what each spacing does to the count. The figures come from the deck calculator, which opens on an 18 x 12 ft deck so the numbers match the article.

Important: joist size, spacing, span, beams, posts, footings and the ledger connection are structural. This guide does not say which spacing is allowed or safe for your deck. It also does not give a span for any lumber size. Those answers come from your local building department, a span table for your lumber and your decking maker's instructions.

Try itDeck boards and joists: enter your own sizes
You would buy33boards
  • Deck boards, 16 ft33 boards
  • Joists (12 ft long each)15 joists
Open the full calculator with more options

Joist count at 12, 16 and 24 inch spacing

The deck is 18 ft long and 12 ft wide. The joists are spaced along the 18 ft side, and each one is 12 ft long. Boards are 5.5 in wide with the calculator's default gap, 10 percent waste and the default 16 ft board length, so the boards on this 18 ft deck are joined end to end. The 19.2 in row is only a what-if value: the calculator takes any spacing from 8 to 24 in.

Joist spacingJoistsSpaces between joistsTotal joist lengthCompared with 16 inDeck boards
12 in1918228 ft+433
16 in1514180 ft033
19.2 in1312156 ft-233
24 in109120 ft-533

Two things stand out. The joist count falls as the spacing widens, but not in a straight line, because each count is rounded up and then gets one extra joist at the end. And the last column does not move: the deck boards are the same whichever spacing you pick.

18 ft 12 ft joists every 12 in (grey, under the boards)
An 18 x 12 ft deck framed with joists every 12 in. Change the spacing in the calculator and the joist lines move.

The joist formula, step by step

The calculator counts joists in two moves. It divides the deck length by the spacing and rounds up, then adds one joist for the end.

For the 18 ft deck at 12 in:

  1. Length in inches. 18 ft × 12 = 216 in.
  2. Spaces. 216 ÷ 12 = 18, a whole number, so 18 spaces.
  3. Joists. 18 + 1 = 19 joists.

At 16 in:

  1. Length in inches. 18 × 12 = 216 in.
  2. Spaces. 216 ÷ 16 = 13.5, rounded up to 14 spaces.
  3. Joists. 14 + 1 = 15 joists.

Always round up. A fraction of a space still needs a joist at its far end. The calculator shows the same steps under the result so you can check them against your own sketch. The deck width does not enter this formula. It sets the length of each joist and nothing else.

What the count does at different deck lengths

The joist count follows the length of the deck, not its area. Here is the same 12 ft wide deck at seven lengths. Each cell is the number of joists.

Deck lengthAt 12 inAt 16 inAt 24 in
10 ft1196
12 ft13107
14 ft15128
15 ft16139
16 ft17139
18 ft191510
20 ft211611

The 15 ft and 16 ft rows match at 16 in: both take 13 joists, so the extra foot of deck adds no joist. Rounding hides a little extra length, so a deck that is a few inches longer than a multiple of the spacing can cost you a whole joist. If your deck sits just past one of those steps, ask whether a slightly shorter deck suits your plan.

Where the last joist lands

When the length is not a multiple of the spacing, the last space is shorter than the rest if you hold the full spacing from the start. Another way to lay it out is to divide the length evenly. The calculator's count supports both. The table shows what each looks like on the 18 ft deck.

Target spacingSpacesEven spacing that fitsLast space at full spacing
12 in1812 in12 in
16 in1415.43 in8 in
19.2 in1218 in4.8 in
24 in924 in24 in

An even layout keeps every space at or under your target, as the third column shows. Whether you can use it depends on your plan and your decking layout, so check before you mark the ledger.

What spacing changes and what it does not

Spacing changes the number of joists, the total joist lumber and the number of places where joists meet a ledger or a beam. The calculator does not count hangers or fasteners, but their number follows the joist count. Spacing also changes how far each deck board spans between supports.

It does not change the board rows, the board count or the length of each joist. The table below keeps the 18 ft length and changes only the deck width. The joist count stays put, because the width only sets how long each joist is.

Deck widthLength of each joistJoists at 12 inJoists at 16 in
8 ft8 ft1915
10 ft10 ft1915
12 ft12 ft1915
14 ft14 ft1915

The count also leaves out the pieces around the frame. Rim boards, doubled joists, blocking, beams and posts are not in the number. Take those from your plan.

Picking a spacing

This guide cannot pick one for you, but it can tell you what to check.

  • Your decking maker. Boards come with instructions that set how far apart supports may be. The limit can differ for boards laid straight and boards laid at an angle. Read the label or the installation sheet.
  • Your joist lumber and span. How far a joist can span at a given spacing depends on the species, grade and size. Use a span table for your own lumber, from your building department or the lumber supplier.
  • Your local code. Codes set the loads and the details. A plan reviewer can tell you what your area asks for.
  • Your layout. Spacing sets where each joist sits, so it has to work with your ledger, beam and any picture-frame border boards.

The calculator's default is 16 in, and it shows a reminder to check your board rating when you go above that. Neither the default nor the reminder is a rule. Treat the default as a starting point to test counts, not as an allowed spacing.

Common mistakes with joist spacing

  1. Reading a spacing from a chart for different lumber. A span or spacing that works for one size or grade says nothing about another.
  2. Forgetting the extra joist. Spaces and joists are not the same number. 14 spaces take 15 joists.
  3. Counting along the wrong side. The count follows the length the joists are spaced along, here 18 ft, not the 12 ft joist length.
  4. Rounding down. 13.5 spaces is 14 spaces, not 13.
  5. Comparing spacings by count alone. A lower count is not a better deck. The boards, the span and the code decide.
  6. Leaving out the rest of the frame. Beams, rim boards and doubled joists sit outside this count.
  7. Treating a what-if as a rule. The 19.2 and 24 in rows show counts. They do not say those spacings are allowed.

For board counts on a deck of another size, see how many deck boards for a 12x16 deck. The footings under the frame are a separate calculation: concrete for deck footings works out bags from a footing size and count taken from your plan.

Frequently asked questions

Is 12 or 16 inch joist spacing better for a deck?

Neither is better by default. Closer spacing takes more joists. What you may use depends on your decking, your joist lumber, the span and your local code. Ask your building department and read the decking instructions.

How many joists do I need for an 18 x 12 ft deck at 16 inches?

15 joists, each 12 ft long, for the 18 ft length. At 12 in it is 19 joists, and at 24 in it is 10.

How many more joists does 12 inch spacing add?

On this deck, 4 more than 16 in spacing, which is 48 ft more joist lumber at 12 ft each.

Does joist spacing change the number of deck boards?

No. The board count comes from the deck width, the board width, the gap, the board length and the waste. The calculator gives 33 boards at every spacing for this deck.

What does on center mean?

It means the distance from the middle of one joist to the middle of the next. That is how the calculator measures spacing.

Can I space joists 24 inches apart?

The calculator accepts it and counts 10 joists for this deck. Whether it is allowed depends on your boards, your lumber and your local code, so check all three before you plan around it.

How far can a joist span at 16 inches?

That depends on the lumber size, species and grade, the loads and your code. This guide gives no span. Use a span table for your own lumber or ask your building department.

Why is there one more joist than spaces?

Spaces sit between joists. A run of 14 spaces needs 15 joists, one at each end of every space.

Deck Joist Spacing, 12 vs 16 Inches: How Many Joists Do You Need?
Save or share this answer.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them in the calculator to match your product and your site.

SettingValueStatusSource
deck waste10 percentEditable defaultContractor rule of thumb for deck boards. Not verified.
deck joist spacing16 inEditable defaultCommon joist spacing for many deck boards. The right spacing depends on the boards and local code. Not verified.

Keep reading